Yayınlar

2019

  • Ö. Saygılı, (2019) Discrete Element Modeling of an Egyptian Obelisk, International Civil Engineering and Architecture Conference 2019, 17-20 April, Trabzon, Turkey.
  • Ö. Saygılı, J.V. Lemos, C.S. Structural Dynamic Characteristics of the Frontinus Gate, Earthquakes and Structures, under review.
  • Ö. Saygılı (2019) Estimation of Structural Dynamic Characteristics of the Egyptian Obelisk of Theodosius, Earthquakes and Structures, 16, (3) 311-320.
  • Kose-Mutlu, B., Ozgun, H., Ersahin, M. E., Kaya, R., Eliduzgun, S., Altinbas, M., Koyuncu, I., “Impact of salinity on the population dynamics of microorganisms in a membrane bioreactor treating produced water” Sci. Total Env., 646, 1080-1089, (2019) DOI: 10.1016/j.scitotenv.2018.07.386
  • Turken, T., Kose-Mutlu, B., Okatan, S., Durmaz, G., Guclu, M. C., Guclu, S., Koyuncu, I. “Long-term MBR performance of polymeric membrane modified with Bismuth- BAL chelate (BisBAL)” Env. Technol. 1-7, (2018). DOI: 10.1080/09593330.2018.1435735
  • Ersahin, M. E., Ozgun, H., Kaya, R., Kose-Mutlu, B., Kınacı, C., Koyuncu, I. “Treatment of Produced Water Originated from Oil and Gas Production Wells: A Pilot Study and Cost Analysis”, Env. Sci. Poll. Res., 25: 6398, (2017) DOI: 10.1007/s11356-017-0961-7.
  • Kose-Mutlu, B., Turken, T., Guclu S., Guclu, M. C., Durmaz, G., Okatan, S., Ovez, S. Koyuncu, I. “Bismuth Chelate-Doped Microfiltration Membrane and Its Anti-Biofouling Performance during a High-Flux Membrane Bioreactor Operation”, Clean: Soil, Air, Water, 45(8) 1500923,1-10, (2017) DOI: 10.1002/clen.201500923
  • Köse-Mutlu, B., Türken, T., Okatan, S., Durmaz, G., Ürper-Bayram, M., Güçlü, S., Övez, S., Koyuncu, İ. “Bizmut-BAL Şelatı Sentezinin Optimizasyonu ve Escherichia coli, Streptococcus pyogenes veAktif Çamur Üzerindeki İnhibisyon Etkisi”, Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Basım aşamasında, (2019)
  • Kose-Mutlu, B., Ergon-Can, T., Koyuncu, I., Lee, C-H., “Quorum Quenching for Effective Control of Biofouling in Membrane Bioreactor: A Comprehensive Review of Approaches, Applications, and Challenges” Env. Eng. Res., In press, (2019)
  • Monkul, M.M., Aydın, N.G., Demirhan, B., Şahin, M. (2019). “Undrained shear strength and monotonic behavior of different non-plastic silts: Sand-like or Clay-like?”, Geotechnical Testing Journal, ASTM, DOI: 10.1520/GTJ20180147
  • Evaluation of TS500-2000 Shear Design Provisions for Deep Beams, Almıla Uzel, Süleyman Demirel University Journal of Natural and Applied Sciences (in print)
  • Shear Strength of Point Loaded Non-Slender Members,  Elif Daniş,Almıla Uzel, fib Symposium "Innovations in Materials, Design and Structures", Proceedings of the fib Symposium 2019, 27-29 May 2019, Krakow, POLAND. (printed in Book of Extended Abstracts, Page 529, ISSN 2617-4820 ISBN 978-1-940643-01-1, full paper in digital form ISBN 978-2-940643-00-4,  ISSN 2617-4820)
  • Ergön-Can, T., Köse-Mutlu, B., Koyuncu, İ., & Lee, C. H. The Use of the New Quorum Quenching Isolate of Bordetella hinzii S3 to Prevent Biofouling in Membrane Bioreactor Systems. Waste and Biomass Valorization, 1-11. (2019)
  • Kose-Mutlu, B., Ergon-Can, T., Koyuncu, I., Lee, C-H., “Quorum Quenching for Effective Control of Biofouling in Membrane Bioreactor: A Comprehensive Review of Approaches, Applications, and Challenges” Env. Eng. Res., 24(4), 543-558. (2019)
  • Yavuzturk-Gul, B. Kose-MutluB. Park, P. K. Lee, C.H. Koyuncu, I. Quorum Quenching for Biofouling Control in Membrane Bioreactors, Encyclopedia of Water: Science, Technology, and Society, New Jersey, ABD, John, Wiley & Sons, Inc., basım aşamasında.
  • Köse-Mutlu, B., Türken, T., Okatan, S., Durmaz, G., Ürper-Bayram, M., Güçlü, S., Övez, S., Koyuncu, İ. “Bizmut-BAL Şelatı Sentezinin Optimizasyonu ve Escherichia coli, Streptococcus pyogenes veAktif Çamur Üzerindeki İnhibisyon Etkisi”, Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, 21(62), 499-508, (2019) DOI:10.21205/deufmd.2019216215
  • Koyuncu, I. Sengur-Tasdemir, R. Ersahin, M. E., Ozgun-Ersahin, H. Kose-MutluB. Turken, T., Kaya, R. Gul-Yavuzturk, B. “Applications of Ceramic Membrane Bioreactors in Water Treatment”, CERAMIC MEMBRANE BIOREACTORS, Elsevier, basım aşamasında.
  • Özhan, H.O. (2019). “Geosentetik Kil Örtülerde Kullanılan Poliakrilamid Katkılı Bentonitin Kayma Direnci Tayini”, Sekizinci Ulusal Geosentetikler Konferansı, Boğaziçi Üniversitesi, İstanbul, 16-17 Mayıs 2019, pp. 319-327
  • Özhan, H.O. (2019). “Measuring Shear Strength Parameters of Polymer-Added Bentonite-Sand Mixtures in Laboratory Experiments”, 7th International Symposium on Deformation Characteristics of Geomaterials (organized by ISSMGE), Glasgow, Scotland, 26-28 June 2019, E3S Web of Conferences 92, 11014 (2019), DOI: 10.1051/e3sconf/20199211014

2018

  • Akgül, M.A. ve Yıldız, C. (2018). "Effect of Water Waves on Water-Deployed Photovoltaic Power Plants", GAP International Renewable Energy and Energy Efficiency Congress GAPYENEV 2018, 10-12 May 2018, Şanlıurfa, Türkiye.
  • Akgül, M.A. ve Day, A. (2018). "Monopile Tipi Açık Deniz Rüzgar Türbinine Ekip Aktarımı: Türbin-Tekne Hidrodinamik Etkileşiminin Fiziksel Modellenmesi", TMMOB İMO 9. Kıyı Mühendisliği Sempozyumu, 1-2 Kasım 2018, Adana, Bildiriler Kitabı, s. 573-585.
  • M. Karakaya, Ö. Saygılı, E. Cakti (2018) Blind Prediction-Technical Report, Seismic modelling of masonry buildings: present knowledge and open challenges for research and practice Organizers: G. Magenes, P.B. Lourenço and S. Cattari. 16th ECEE Special Session - Thessaloniki, Greece 18-21 June 2018.
  • Ö. Saygılı, Ö. Karagöz (2018) Earthquake Behavior of Çanakkale Historical Clock Tower, NW Turkey, The 36th General Assembly of the European Seismological Commission, 2-7th September 2018, Valletta, Malta.
  • Akgül, M.A. (2018), "Kısmi batık yatay bir silindir üzerinde dalga tırmanmasının deneysel etüdü", TMMOB İnşaat Mühendisleri Odası 9. Ulusal Kıyı Mühendisliği Sempozyumu, 1-3 Kasım 2018, Adana (kabul edilmiş tam metin)
  • Akgül, M.A., Kabdaşlı, M.S. (2018), "Modüler plastik bir yüzer dalgakıran yapısının performansının deneysel incelenmesi", TMMOB İnşaat Mühendisleri Odası 9. Ulusal Kıyı Mühendisliği Sempozyumu, 1-3 Kasım 2018, Adana (kabul edilmiş tam metin)
  • fib MC2010 Shear Enhancement Method for Point Loaded Non-Slender Members, Almıla Uzel, Elif Daniş, fib Congress "Better, Smarter, Stronger", 7-11 October 2018, Melbourne, AUSTRALIA. (printed in Book of Extended Abstracts, Page 644, ISBN 978-1-877040-14-6, full paper in digital form can be downloaded from congress website)
  • Vuran E. (2018), “Shear migration and dynamic shear amplification effects on seismic response of core walls”, Bulletin of Earthquake Engineering, DOI: 10.1007/s10518-018-0362-4
  • Kose-Mutlu, B., Cantoni, B., Turolla, A., Antonelli, M., Hsu-Kim, H., Wiesner, M. R., “Application of nanofiltration for Rare Earth Elements recovery from coal fly ash leachate: Performance and cost evaluation” Chem. Eng. J., 349, 309-317, (2018) DOI: 10.1016/j.cej.2018.05.080
  • Kose-Mutlu, B., Turken, T., Guclu, M. C., Guclu, S., Ovez, S., Koyuncu, I. “Effects of the post-modification using bismuth chelate (BisBAL) on the anti-biofouling and performance properties of flat-sheet microfiltration membranes” J. Water Process Eng., 23, 75-83, (2018) DOI: 10.1016/j.jwpe.2018.03.001  
  • Monkul, M.M., Yenigün, S., Eseller-Bayat, E. (2018). “Importance of automatization on dry funnel deposited specimens for liquefaction testing”, Geotechnical Special Publication No 293: Geotechnical Earthquake Engineering and Soil Dynamics V: Slope Stability and Landslides, Laboratory Testing, and In Situ Testing, ASCE, 286-295, ISBN: 9780784481486.
  • Eseller-Bayat, E., Monkul, M.M., Akın, O, Yenigun, S. (2018). “Evaluation of the effect of relative density on liquefaction assessment of sands with plastic and non-plastic fines”, Geotechnical Special Publication No 290: Geotechnical Earthquake Engineering and Soil Dynamics V: Liquefaction Triggering, Consequences, and Mitigation, ASCE, 244-254, ISBN: 9780784481455.
  • Kaya, R., Özgün, H. Köse-Mutlu, B., Erşahin, M. Altınbaş, M. Sayılı, S. Hoşhan, P. Atay, D. Eren, E. Kınacı, C. Koyuncu, İ. “Petrol Ve Doğal Gaz Üretim Atıksularının Biyolojik Arıtılabilirliğinin İncelenmesi”, Uludağ University Journal Of The Faculty Of Engineering, 23 (2), 13-28, (2018) DOI: 10.17482/Uumfd.357454.
  • Koyuncu, İ., Hasar, H. Koseoğlu-İmer, D. Y. Köse-Mutlu, B., Eyvaz, M. Özbey- Ünal, B. “Bölüm 12-Yenilikçi Membran Biyoreaktör (MBR) PROSESLERİ”, Su/Atıksu Arıtımı ve Geri Kazanılmasında Membran Teknolojileri ve Uygulamaları, Çevre ve Orman Bakanlığı, Ankara, Türkiye, 2018
  • Köse Mutlu, B., İmer, D. Yazagan, A. Zeytuncu, B. Öztürk, İ. Koyuncu, İ. “Bölüm 16-Membran Teknolojilerinde Konsantre Yönetimi”, Su/Atıksu Arıtımı ve Geri Kazanılmasında Membran Teknolojileri ve Uygulamaları, Çevre ve Orman Bakanlığı, Ankara, Türkiye, 2018.
  • Koyuncu, İ., Korkut, S. Türken, T. Köse-Mutlu, B. “Bölüm 17-Membran Teknolojilerinde Maliyet Analizi”, Su/Atıksu Arıtımı ve Geri Kazanılmasında Membran Teknolojileri ve Uygulamaları, Çevre ve Orman Bakanlığı, Ankara, Türkiye, 2018.
  • Koyuncu, İ., Şengür-Taşdemir, R. Köseoğlu-İmer, D. Güçlü, S. Köse-Mutlu, B., Türken, T. Paşaoğlu, M. Kaya, R. Ağtaş, M. Yüksekdağ, A. “Bölüm 20-Membran Terimleri Sözlüğü”, Su/Atıksu Arıtımı ve Geri Kazanılmasında Membran Teknolojileri ve Uygulamaları, Çevre ve Orman Bakanlığı, Ankara, Türkiye, 2018.
  • Polat, G.Ozel, N. M. and Crampin, S..: Preliminary Investigating results from Azimuthal Seismic Anisotropy beneath Western Anatolia and the Hellenic Subduction Zone, o Bulletin for Earth science, Hacettepe University, 2018. 
  • Crampin S., Polat G., Gao Y., Taylor D.B., Ozel N.M. (2018) Shear-Wave Splitting Indicates Non-Linear Dynamic Deformation in the Crust and Upper Mantle. In: Tsonis A. (eds) Advances in Nonlinear Geosciences. Springer (https://link.springer.com/chapter/10.1007/978-3-319-58895-7_2).
  • Monkul, M.M., Yenigün, S., Eseller-Bayat, E. (2018). “Kuru huni yöntemiyle geniş aralıkta göreceli sıkılık değerlerinin elde edilmesi”. Zemin Mekaniği ve Geoteknik Mühendisliği 17. Ulusal Konferansı, İstanbul Üniversitesi, İstanbul, Türkiye, Cilt 3, syf. 1249-1260.
  • Monkul, M.M. (2018). “Türkiye Bina Deprem Yönetmeliği 2018'e göre dayanma yapıları ve bodrum perdelerinin tasarımı”. Zemin Mekaniği ve Geoteknik Mühendisliği 17. Ulusal Konferansı, İstanbul Üniversitesi, İstanbul, Türkiye, Cilt 1, syf. 233-242.
  • Database of Shear Tests Subjected to Uniformly Distributed Loading, Almıla Uzel and Ceyda Nur, pp-156-169, fib Bulletin 85: Towards a rational understanding of shear in beams and slabs, Technical Report, ISSN 1562-3610, ISBN 978-2-88394-125-0, May 2018, 388 pages. Printed by DCC Document Competence Center Siegmar Kästl e.K., Germany
  • Koyuncu, İ., Hasar, H. Koseoğlu-İmer, D. Y. Köse-MutluB.Eyvaz, M. Özbey- Ünal, B. “Bölüm 12-Yenilikçi Membran Biyoreaktör (MBR) PROSESLERİ”, Su/Atıksu Arıtımı ve Geri Kazanılmasında Membran Teknolojileri ve Uygulamaları, Çevre ve Orman Bakanlığı, Ankara, Türkiye, 2018.
  • Köse MutluB.İmer, D. Yazagan, A. Zeytuncu, B. Öztürk, İ. Koyuncu, İ. “Bölüm 16-Membran Teknolojilerinde Konsantre Yönetimi”, Su/Atıksu Arıtımı ve Geri Kazanılmasında Membran Teknolojileri ve Uygulamaları, Çevre ve Orman Bakanlığı, Ankara, Türkiye, 2018.
  • Koyuncu, İ., Korkut, S. Türken, T. Köse-MutluB. “Bölüm 17-Membran Teknolojilerinde Maliyet Analizi”, Su/Atıksu Arıtımı ve Geri Kazanılmasında Membran Teknolojileri ve Uygulamaları, Çevre ve Orman Bakanlığı, Ankara, Türkiye, 2018.
  • Koyuncu, İ., Şengür-Taşdemir, R. Köseoğlu-İmer, D. Güçlü, S. Köse-MutluB.Türken, T. Paşaoğlu, M. Kaya, R. Ağtaş, M. Yüksekdağ, A. “Bölüm 20-Membran Terimleri Sözlüğü”, Su/Atıksu Arıtımı ve Geri Kazanılmasında Membran Teknolojileri ve Uygulamaları, Çevre ve Orman Bakanlığı, Ankara, Türkiye, 2018.
  • Özhan, H.O. (2018). Katyonik Polimer Katkılı Geosentetik Kil Örtülerin Farklı Tuz Çözeltileri ile Etkileşimi, Artvin Çoruh Üniversitesi Doğal Afetler ve Çevre Dergisi (ULAKBİM), 4(2), 171-181. DOI: 10.21324/dacd.412180
  • Güler, E., Özhan, H.O. and Karaoglu, S. (2018). Hydraulic performance of anionic polymer-treated bentonite-granular soil mixtures, Applied Clay Science, 157, 139-147. DOI: 10.1016/j.clay.2018.02.047
  • Özhan, H.O., Güler, E. (2018). Design of a Geomembrane-Laminated Geosynthetic Clay Liner on the Slopes of a Mine Tailings Dam in Emet, Turkey, Mine Water and the Environment, 37(3), 541-551. DOI: 10.1007/s10230-018-0538-9
  • Özhan, H.O. (2018). Hydraulic Capability of Polymer-Treated GCLs in Saline Solutions at Elevated Temperatures, Applied Clay Science, 161, 364-373. DOI: 10.1016/j.clay.2018.05.007
  • Özhan, H.O. (2018). Effects of Temperature Increase in 0.5 M MgCl2 Solution on Hydraulic Capability of Anionic Polymer-Treated Geosynthetic Clay Liners Used as Barriers, Journal of Environmental Engineering, ASCE, 144(10). DOI: 10.1061/(ASCE)EE.1943-7870.0001451

2017

  • Akgül, M.A., Kabdaşlı, M.S. (2017). "Experimental Study for the Hydraulic Efficiency of an Overtopping Type Wave Energy Converter with a Circular Runup Ramp", Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 19(1), 118-131.
  • E. Çaktı, Ö. Saygılı, E. Dar, T. Ercan (2017) Seismıc Behavior of The Edirnekapi Mihrimah Sultan Mosque in Istanbul, 6th International Conference on Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering Rhodes Island, Greece, 15–17 June 2017.
  • E. Çaktı, U. Hancılar, Ö. Saygılı (2017) Fragility Functions for Minarets, 6th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering COMPDYN 2017 15-17 June 2017, Rhodes Island, Greece.
  • E. Çaktı, Ö. Saygılı, C. S. Oliveira J. V. Lemos (2017) Non-Lınear Earthquake Response of Three Minarets In Istanbul, 16th World Conference on Earthquake Engineering, January 9-13, 2017 Chile.
  • Use of Post-tensioned Concrete Slabs for Sustainable Design of Buildings, Hikmet Süleymanoğlu, Almıla Uzel, Güray Arslan, fib Symposium “High Tech Concrete: Where Technology and Engineering Meets”, 12-14 June 2017, Maastricht, THE NETHERLANDS. (printed in Book of Abstracts, Page 266 ISBN 978-3-319-59470-5 ISBN 978-3-319-59471-2 (eBook) pp 2390-2395, (DOI 10.1007/978-3-319-59471-2_272))
  • Eseller-Bayat, E., Monkul, M.M., Akın, O, Yenigun, S. (2017). “The coupled influence of relative density, CSR, plasticity and content of fines on cyclic liquefaction resistance of sands”, Journal of Earthquake Engineering, Taylor & Francis, http://dx.doi.org/10.1080/13632469.2017.1342297
  • Monkul, M.M., Etminan, E., Senol, A. (2017). “Coupled influence of content, gradation and shape characteristics of silts on static liquefaction of loose silty sands”, Soil Dynamics and Earthquake Engineering, Elsevier, 101, 12-26.
  • Monkul, M.M., Dacic, A. (2017). “Effect of grain size distribution on stress-strain behavior of Lunar Soil Simulants”, Advances in Space Research. Elsevier, 60, 636-651.
  • Monkul, M.M., Yenigün, S., Eseller-Bayat, E. (2017). “Kuru kum numunelerin sismik sıvılaşma potansiyelinin dinamik basit kesme deneyinden belirlenmesi (Determining the seismic liquefaction potential of dry sand specimens from cyclic simple shear tests)”. 7th Geotechnical Symposium with International Participation, Istanbul Technical University, İstanbul, Türkiye, pp. 697-705. (In Turkish). ISBN:978-605-01-1103-3.
  • Köse-Mutlu, B., Türken, T. Güçlü, M. C. Ürper, G. M. Güçlü, S. Övez, S. Koyuncu, İ. “BisBAL Kullanılarak Gerçekleştirilen Yüzey Modifikasyonu ile Düz Plaka Mikrofiltrasyon Membranlarının Biyotıkanmaya Karşı Direncinin Arttırılması”, MEMTEK 2017 - 5. Ulusal Membran Teknolojileri Ve Uygulamaları Sempozyumu, İstanbul, Türkiye, 21-23 Eylül 2017.  
  • Köse-Mutlu, B., Ergön-Can, T. Park, P. Lee, C.-H. Koyuncu, İ. “Evsel Atıksu Arıtımında Etkin MBR Kullanımı: Çeşitli QQ Uygulamalarının Filtrasyon Performansı ve Maliyet Açısından Değerlendirilmesi”, Membran Biyoreaktör Teknolojileri Çalıştayı,İstanbul, Türkiye, 20 Nisan 2017.
  • Özhan, H.O. (2017). “Farklı Sıcaklıklardaki Kimyasal Çözeltide Kullanılan Geosentetik Kil Kaplamanın Hidrolik Performansı”, Yedinci Ulusal Geosentetikler Konferansı, Boğaziçi Üniversitesi, İstanbul, 11-12 Mayıs 2017, pp. 97-107
  • Özhan, H.O. (2017). "GCL Usage in Waste Containment Facilities"- Keynote Speaker in Workshop 4-Geosynthetics Engineering: Barrier, Sustainable Civil Infrastructures-GeoMeast 2017 International Conference, Sharm-El Sheikh, Egypt, 15-19 July 2017
  • Özhan, H.O. (2017). “Effects of Adding Anionic Polymer to GCLs Treated with Chemical Solutions”, 9th International Conference on Soil Mechanics and Geotechnical Engineering (organized by ISSMGE), Seoul, South Korea, 17-22 September 2017, pp. 955-958
  • Özhan, H.O. (2017). Problems and solutions for GCLs used in waste containment facilities: temperature concerns and polymer treatment related to GCLs used in waste containment areas, Innovative Infrastructure Solutions, 2(43). DOI: 10.1007/s41062-017-0095-2
  • Özhan, H.O., Güler, E. (2017). Critical tendon bond length for prestressed ground anchors in pullout performance tests conducted in sand, International Journal of Civil Engineering, 16(10), 1329-1340. DOI: 10.1007/s40999-017-0261-0

2016

  • Akgül, M. A. (2016). "Effect of Pipe Spacing on the Pertormance of a Trimaran Floating Pipe Breakwater", 26th International Ocean and Polar Engineering Conference, ISOPE 2016, 26 June-01 July 2016, Rodos, Yunanistan.
  • E. Çaktı, Ö. Saygılı, J.V. Lemos, C.S. Oliveira (2016) Discrete Element Modeling of a Scaled Masonry Structure and Its Validation, Engineering Structures, 126, 224–236.
  • Ö. Saygılı, E. Çaktı (2016) Assessment of Seismic Behavior of Masonry Minarets by Discrete Element Method, 16th Internatıonal Brick And Block Masonry Conference "Masonry In A World of Challenges" June 26 - 30, 2016, Padova, Italy.
  • Ö. Köylüoğlu (2016), “Tendering Based on Life Cycle Cost and Life Cycle Analysis”, 19th Congress of IABSE-Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden.
  • Ö. Köylüoğlu (2016) “Social and Environmental Sustainability Through Green Urban Transformation”, SBE16-Istanbul, Smart Metropoles: Integrated Solutions for Sustainable and Smart Buildings and Cities, Istanbul, Turkey.
  • Evaluation of Strut-and-tie Provisions of fib Model Code 2010 for RC Non-slender Members under Point loads, Almıla Uzel, fib Symposium “Performance-Based Approaches for Concrete Structures”, 21-23 November 2016, Cape Town, SOUTH AFRICA. (printed: pp.157-158 ISBN:978-2-88394-120-5, full paper in digital form ISBN 978-2-88394-121-2)
  • Design of Indirectly Loaded Large Footings for One-way Shear, Almıla Uzel, Evan C. Bentz, Michael P. Collins, ACI Structural Journal, V. 113, No. 3, May-June 2016. (DOI 10.14359/51688614)
  • Ergon-Can, T., Kose-Mutlu, B., Koyuncu, I., Lee, C.-H. “Biofouling Control Based on Bacterial Quorum Quenching with a New Application: Rotary Microbial Carrier Frame”, J. Membr. Sci., 525, 116-124, (2016) DOI: 10.1016/j.memsci.2016.10.036
  • Kose-Mutlu, B., Ersahin, E., Ozgun, H., Kaya, R., Kınacı, C., Koyuncu, I. “Influence of Powdered and Granular Activated Carbon System as a Pre‐Treatment Alternative for Membrane Filtration of Produced Water”, J. Chem. Technol. Biotechnol., 92(2), 283-291, (2016) DOI: 10.1002/jctb.4996.
  • Yangin-Gomec, C., Kose-Mutlu, B., Dulekgurgen, E., Tanik, A. Ozturk, I. “Development and Application of a Rubric Specific for the Senior-Year Graduation Design Projects for Assessing Learning Outcomes”, Iberoamerican J Project Manag, 7(1), 47-61, (2016)
  • Gul, B., Kose-Mutlu, B., Ergon, T. Koyuncu, I. “Evaluation of QQ Bacteria Isolated from Marine Pond Saltern and Leachate and Biofouling Control with Bacillus sp. T5 in MBR”, 7th International Workshop, MBR for the Next Generation, İstanbul, Türkiye, 10 Mayıs 2016.  
  • Monkul, M.M.Yükselen-Aksoy, Y. (2016). “Sustainable usage of dredge materials at engineering fills and investigation of their performance with different additives”. Geotechnical Special Publication No 273: Sustainable Waste Management and Remediation, ASCE, 471-480. ISBN 978-0-7844-8016-8
  • Etminan, E., Monkul, M.M.Senol, A. (2016). “Effect of silt size and gradation on cyclic liquefaction of sands”. Proceedings of the 4th International Conference on New Developments in Soil Mechanics and Geotechnical Engineering, Nicosia, Turkish Republic of Northern Cyprus, 321-327. ISBN 975-8359-28-2.
  • Monkul, M.M., Etminan, E., Senol, A. (2016). “Silt boyutu ve dane şekil özelliklerinin siltli kumların sismik sıvılaşmasına etkisi (Influence of silt size and shape characteristics on seismic liquefaction of silty sands)”. ZM16: Proceedings of Sixteenth Turkish Congress on Soil Mechanics and Geotechnical Engineering, Atatürk University, Erzurum, Türkiye, Vol 1, pp. 285-294 (In Turkish).
  • Monkul, M.M. (2016). “Influence of silt characteristics on liquefaction behavior of silty sands”, Marie Curie Project No: 303974, Final Report, 12 pages.
  • Monkul, M.M. (2016). “Influence of silt characteristics on liquefaction behavior of silty sands”, Marie Curie Project No: 303974, Periodic Report II, 12 pages.
  • Aydın, R., Yüksel, E., Yardımcı, N., Gökce,T., 2016. “Cyclic  Behaviour of Diagonally Stiffened Beam-to-Column Connections of Corrugated-Web I Sections”Engineering Structures, 121(2016), 120-135.
  • Aydın, R., Yüksel, E., Yardımcı, N., 2016. “Behaviour of a Beam-to-Column Connection of Thin Sinusoidally Corrugated Web I Sections”, Prof. Dr. M. Hasan Boduroğlu Symposium, İstanbul May 9-10, 2016, 139-152.
  • Polat, G.Ozel, N. M. and Koulakov, I.; Investigating P- and S-wave velocity structure beneath the whole Marmara region (Turkey) and surrounding from local earthquake tomography, Earth Planet Space (2016) 68: 132. doi:10.1186/s40623-016-0503-4 .
  • Monkul, M.M.Etminan, E., Senol, A. (2016). “Influence of coefficient of uniformity and base sand gradation on static liquefaction of loose sands with silt”, Soil Dynamics and Earthquake Engineering, Elsevier, 89, 185-197.
  • Özhan, H.O. (2016). “Katyonik Polimer Katkılı Geosentetik Kil Örtülerin Hidrolik Özellikleri”, Zemin Mekaniği ve Geoteknik Mühendisliği Onaltıncı Ulusal Kongresi, Atatürk Üniversitesi, Erzurum, 13-14 Ekim 2016, pp. 139-148
  • Özhan, H.O. (2016). “Hydraulic Capability of Polymer-Treated GCLs”, 4th International Conference on New Developments in Soil Mechanics and Geotechnical Engineering (organized by ISSMGE), Near East University, Nicosia-North Cyprus, 2-4 June 2016, pp. 559-566
  • Özhan, H.O., Eseller Bayat, E. and Zanjani, E.Y. (2016). “Dynamic Analysis of Buried Pipelines with Geogrid Reinforcement”, 6th European Geosynthetics Congress (organized by IGS), Ljubljana, Slovenia, 25-28 September 2016, pp. 1390-1400
  • Özhan, H.O., Güler, E. (2016). Factors Affecting Failure by Internal Erosion of Geosynthetic Clay Liners Used in Fresh Water Reservoirs, Environmental & Engineering Geoscience, May 2016, 22(2), 157-169. DOI: 10.2113/gseegeosci.22.2.157

2015

  • E. Çaktı, C.S. Oliveira, J.V. Lemos, Ö. Saygılı, S. Görk, E. Zengin (2015) Ongoing Research on Earthquake Behavior of Historical Minarets in Istanbul, in In Seismic Assessment, Behavior and Retrofit of Heritage Buildings and Monuments, Ioannis N. Psycharis, Stavroula J Pantazopoulou, Manolis Papadrakakis (Editors). 321-339. Springer.
  • Ö. Saygılı, E. Çaktı (2015) Yığma Minarelerin Deprem Davranışı, Eighth National Conference on Earthquake Engineering, May11-14, 2015 Istanbul, Turkey.
  • Ö. Köylüoğlu (2015), “Urban Transformation Opportunity for Sustainable Development and Benefits Based on LCC Analysis”,  IABSE Conference-Structural Engineering: Providing Solutions to Global Challenges, Geneva, Switzerland.
  • One Way Shear Behaviour of Indirectly Loaded Large Footings, Almıla Uzel, Evan C. Bentz and Michael P.Collins, fib Symposium “Concrete - Innovation and Design”, 18-20 May 2015, Copenhagen, DENMARK. (printed: pp.85-86, full paper in digital form)
  • Truck Ramp of Aura: Canada’s highest residential building, A. Uzel, T. Kokai, B. Graziani, G. Colangelo, D. Xavier, J. Robinson, 8th International Symposium on Steel Bridges “Innovation and New Challenges”, 14-16 Sept 2015, İstanbul, TURKIYE. (printed: pp.215-220 ISBN:978-605-65900-2-3)
  • Vuran E., Aydınoğlu M.N. (2015), “Capacity and ductility demand estimation procedures for preliminary design of coupled core wall systems of tall buildings”, Bulletin of Earthquake Engineering, DOI 10.1007/s10518-015-9853-8
  • Aydınoğlu M.N., Vuran E. (2015), “Developments in seismic design of tall buildings: Preliminary design of coupled core wall systems”, Perspectives on European Earthquake Engineering and Seismology, Volume 2, Chapter 9, Geotechnical, Geological and Earthquake Engineering series, Vol 39.
  • Kose-Mutlu, B., Ergon-Can, T., Koyuncu, I. Lee, C.-H. “Quorum Quenching MBR Operations for Biofouling Control Under Different Operation Conditions and Using Different Immobilization Media”, Desal. Water Treat., 57(38), 17696-17706, (2015
  • Ovez, S., Turken, T., Kose, B., Okatan, S. Durmaz, G. Guclu, M. C. Guclu, S. Chellam, S. Koyuncu, I. “Manufacturing of Antibiofouling Polymeric Membranes with Bismuth-BAL chelate (BisBAL)”, Desal. Water Treatment, 57(28), 12941-12955, (2015) DOI: 10.1080/19443994.2015.1057528.
  • Gul, B., Kose-Mutlu, B., Ergon, T. Koyuncu, I. “Isolation and Identification of Quorum Quenching (QQ) Bacteria from Different Ecological Environments and QQ MBR Operation with New Isolates”, International workshop on MBR/QQ-MBR, Seul, Kore Cumhuriyeti, 19 Kasım 2015
  • Monkul, M.M.Gultekin, C., Gulver, M., Akın, O., Eseller-Bayat, E. (2015). “Estimation of liquefaction potential from dry and saturated sandy soils under drained constant volume cyclic simple shear loading”, Soil Dynamics and Earthquake Engineering, Elsevier, 75, 27-36.
  • Etminan, E., Monkul, M.M.Senol, A. (2015).  “Silt influence on static liquefaction of sands”. Proceedings of the XVI European Conference on Soil Mechanics and Geotechnical Engineering, Edinburgh, U.K.; DOI:10.1680/ecsmge.60678; ISBN 978-0-7277-6067-8.
  • Ataşalar, O., Canatan, H.O., Monkul, M.M., Yükselen-Aksoy, Y. (2015). “İzmir körfezi tarama zemininin kireç ve uçucu kül ile stabilizasyonu (Lime and fly ash stabilization of dredged soil from İzmir Bay)”. 6th Geotechnical Symposium, Çukurova University, Adana, Türkiye (In Turkish).
  • Monkul, M.M.Uzel, A. (2015). “Technical Report regarding the retaining wall located on Topcu Avenue at Atasehir (Ataşehir İlçesi, İnönü Mahallesi, Topçu Caddesi üzerinde bulunan istinat duvarına dair Teknik Rapor)”, Atasehir Municipality, 6 pages.
  • Köse-Mutlu, B., Ergön-Can, T. Hasar, H. Lee, C.-H. Koyuncu, İ. “PVA Boncuklara İmmobilize Edilmiş Rhodococcus Sp. BH4 Quorum Quenching Bakterisinin Kullanımı ile Membran Biyoreaktörlerde Membran Biyotıkanmasının Engellenmesi”, Fırat Üniv. Fen Bilimleri Dergisi, 27(2), 35-42, (2015). http://dergipark.gov.tr/fumbd/issue/29254/313191.  
  • Kose-Mutlu, B., Ergon, T. Lee, C-H. Koyuncu, I. “MBR Uygulamalarında Kullanılan Quorum Quenching (QQ) Bakterilerde Büyüme Fazının QQ Aktivitesine Etkisi”, 4. Ulusal Membran Teknolojileri ve Uygulamaları Sempozyumu,Isparta, Türkiye, 7-8 Ekim 2015.
  • Öztürk, İ., Koyuncu, İ. Köse-Mutlu, B., Yıldız, O. “Atıksu Arıtma Tesisleri İşletimi El Kitabı”, Türkiye Belediyeler Birliği, Ankara, Türkiye, 2015.
  • İnce, C., Derogar, S., Yardımcı, N., Toklu, C., 2015. “The Influence of Zeolite and Powdered Bayburt Stones on the Water Transport Kinetics and Mechanical Properties of Hydrated Lime Mortars”,  Construction and Building Materials, 98(2015), 345-352.
  • Yardımcı, N., Aydöner, B., Gür’eş, H. Y., 2015. Proceedings of the International Symposium “Steel Bridges: Innovation & New Challenges 2015”, Türk Yapısal Çelik Derneği, ISBN: 978-605-65900-2-3, İstanbul.
  • H. O. Gulsoy, V. Gunay, T. Baykara, “Influence of TiC, TiN and TiC(N) additions on sintering and mechanical properties of injection moulded titanium based metal matrix composites”, Powder Metallurgy, Vol.58, Issue.1 (March 2015), pp.30-35.  2015
  • Öztürk, İ., Koyuncu, İ. Köse-MutluB.Yıldız, O. “Atıksu Arıtma Tesisleri İşletimi El Kitabı”, Türkiye Belediyeler Birliği, Ankara, Türkiye, 2015.
  • Özhan, H.O. (2015). “Geotextile Deformation Analysis of Geosynthetic Clay Liners with FEM”, VII International Conference on Textile Composites and Inflatable Structures-Structural Membranes 2015, Barcelona-Spain, 19-21 October 2015, pp. 524-533

2014

  • Akgül, M.A., Kabdaşlı, M.S. (2014). "On a Wave Energy Converter - Floating Breakwater Hybrid", Energy, Education, Science and Technology Part A: Energy, Science and Research, Vol. 32 (1), pp. 509-520.
  • E. Çaktı, Ö. Saygılı, J. V. Lemos, C. S. Oliveira (2014) A Parametric Study on Earthquake Behavior of Masonry Minarets, Tenth U.S. National Conference on Earthquake Engineering Frontiers of Earthquake Engineering July 21-25, 2014 Anchorage, Alaska.
  • Akgül, M.A., Kabdaşlı, M.S. (2014). "Wave Energy Potential at the Shores of Sinop, Black Sea, Turkey." 2nd Asia Wave and Tidal Energy Conference, AWTEC 2014, Tokyo, Japan, 27 July - 01 Aug. 2014.
  • Akgül, M.A., Hizir, O.G. (2014). "A Comparative Numerical Modeling Study of Motions of a Hexagonal Floating Breakwater under Large Amplitude Waves with Varying Upper Structure Design", 7th International Conference on Marine Technology, ICMT 2014, Glasgow, UK, 7-9 July 2014.
  • Akgül, M.A., Kabdaşlı, M.S. (2014), "Boru tipi trimaran yüzer dalgakıranın düzenli dalgalar altında deneysel etüdü", TMMOB İnşaat Mühendisleri Odası 8. Ulusal Kıyı Mühendisliği Sempozyumu, 7-8 Kasım 2014, Istanbul, Bildiriler Kitabı, s. 577-588.
  • Shear Behaviour of Reinforced Concrete Members under Uniform Loads, Almıla Uzel, Evan C. Bentz and Michael P. Collins, 37th IABSE Symposium “Engineering for Progress, Nature and People”, September 3-5 2014, Madrid, SPAIN. (printed: pp.38-39 ISBN 978-3-85748-134-5, cd: ISBN 978-3-85748-135-2)
  • Kose Mutlu, B., Ergon, T. Agtas, M. Urper, M. Turken, T. Lee, C.‐H. Koyuncu, I., “Quorum Quenching MBR Studies at Different Situations”, 6th International Workshop, MBR for the Next Generation, Antalya, Türkiye, 11-12 Eylül 2014
  • Monkul, M.M.Lade, P.V., Etminan, E., Senol, A. (2014). “Compressibility as an indicator of liquefaction potential”, Geotechnical Engineering Journal of SEAGS-AGSSEA, 45 (4), 73-77.
  • Ergon, T., Kose-Mutlu, B., Turken, T. Lee, C.‐H. Koyuncu, I. “Quorum Quenching MBR Operation with Beads Having New Isolated QQ bacteria”, 6th International Workshop, MBR for the Next Generation, Antalya, Türkiye, 11-12 Eylül 2014.
  • Koyuncu, I., Kose, B., Ergon, T. Agtas, M. Urper, M. Turken, T. Lee, C‐H. “New Quorum Quenching Vessel (QQ-Cell) Applications for Long-Term Operations”, 5th International Workshop, MBR for the Next Generation, Berlin, Almanya, 25-26 Haziran 2014.
  • Kose, B., Ergon, T. Agtas, M. Urper, M. Turken, T. Lee, C‐H., Koyuncu, I. “The Application of New Quorum Quenching Vessel for Long-Term Operation”, 4th International Workshop, MBR for the Next Generation and Waste-to-Energy Conversion, Gunsan, Kore Cumhuriyeti, 12-14 Şubat 2014.
  • Monkul, M.M., Etminan, E., Senol, A., Lade, P.V. (2014). “Statik Yükleme Etkisinde Sıvılaşma ve Hacimsel Sıkışma Katsayısı (Static Liquefaction and Volumetric Compressibility)”. ZM15: Proceedings of Fifteenth Turkish Congress on Soil Mechanics and Foundation Engineering, METU, Ankara Türkiye, Vol. 1, pp. 215-222 (In Turkish).
  • Monkul, M.M. (2014). “Influence of silt characteristics on liquefaction behavior of silty sands”, Marie Curie Project No: 303974, Periodic Report I, 11 pages.
  • Aydın, R., Yüksel, E., Yardımcı, N.,  Kısa, M. H., Gökce,T., 2014. “In-plane Behaviour of Beam-to-Column Connections of Corrugated Web I-sections”, Journal of Constructional Steel Research, 100(2014), 183-196.
  • Taşkın,K., Yardımcı, N., Karadoğan, H. F., 2014. “Seismic Resistance of RC Buildings Using Steel Knee Braces”, 7thEuropean Conference on Steel and Composite Structures, Eurosteel 2014, Napoli, Italy, September 10-12, 2014.
  • Ince,C., Karimi, M. R. B., Yardimci, N.,  Derogar, S., Togay, A., Söğütlü, C., 2014. “Behaviour and Design of Cold-Formed Shear Wall Frames With and Without Fibre Cement Sheathing Panels”, 11th International Congress on Advances in Civil Engineering, ACE 2014, 21-25 October 2014, Istanbul.
  • P.E. Türk, O. Geçkili, Y. Türk, V. Günay, T. Bilgin, “In Vitro Comparison of the Retentive Properties of Ball and Locator Attachments for Implant Overdentures”, International Journal of Oral&Maxillofacial Implants, 29 (5), 1106-1113, Sep-Oct 2014.
  • Marian Ivan, Daniela Veronica Ghica, Andrej Gosar, Panagiotis Hatzidimitriou, Rami Hofstetter, Gulten Polat and Rongjiang Wang, 2014 Lowermost mantle velocity estimations beneath Central North Atlantic area from Pdif observed at Balkan, East Mediterranean and American, PAGEOPH.http://link.springer.com/article/10.1007/s0024-014-0859-y.
  • Özhan, H.O., Güler, E. (2014). “İçsel Erozyona Uğramış Geosentetik Kil Örtülerin Kalınlık ve Su Muhtevası Karşılaştırması”, Altıncı Ulusal Geosentetikler Konferansı, Boğaziçi Üniversitesi, İstanbul, 29-30 Mayıs 2014, pp. 27-36
  • Güler, E., Özhan, H.O. and Cengiz, C. (2014). “Lamination Effect on Flow Rates through Composite Liners”, 10th International Conference on Geosynthetics (organized by IGS), Berlin-Germany, 21-25 September 2014, pp. 1694-1700
  • Erkal, A, Özhan, H.O. (2014). Value and Vulnerability Assessment of a Historic Tomb for Conservation, The Scientific World Journal, Volume 2014, Article ID 357679, 1-10. DOI: 10.1155/2014/357679

2013

  • Akgül, M.A., Yilmazer, D., Oguz, E., Yagci, O., Kabdaşlı, M.S. (2013). “The Effect of an Emergent Vegetation  (i.e. Phragmistes Australis) on Wave Attenuation  and Wave Kinematics”, Journal of Coastal Research, Special Issue 65, pp. 147-152.
  • E. Çaktı, C.S. Oliveira, J.V. Lemos, Ö. Saygılı, S. Görk, E. Zengin (2013) Edirnekapı Mihrimah Sultan Camii Minaresinin Deprem Davranışı, Vakıf Restorasyon Yıllığı. 6, 34-40.
  • E. Çaktı, C.S. Oliveira, J.V. Lemos, Ö. Saygılı, S. Görk, E. Zengin (2013) Earthquake Behavior of Historical Minarets in Istanbul, COMPDYN 2013 4th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering M. Papadrakakis, V. Papadopoulos, V. Plevris (eds.) Kos Island, Greece, 12-14 June 2013.
  • E. Çaktı, J. V. Lemos, Ö. Saygılı, C. S. Oliveira (2013) Dynamic Analysis of the Mustafa Pasha Mosque Model by Discrete Elements, SE-50EEE International Conference on Earthquake Engineering - 29 to 31 May 2013 – Skopje.
  • Loukogeorgaki, E., Acanal, L., Yagci, O., Kirca, V.S.O., Akgül, M.A. (2013). “Performance of an Inclined Thin Plate in Wave Attenuation”, Journal of Coastal Research, Special Issue 65, pp. 141-146.
  • Oguz, E., Akgül, M.A., Incecik, A. (2013). "Offshore Wind Farms: Potential and Applicability in the Southern Marmara Region, Turkey", 15th Congress of Intl. Maritime Assoc. of Mediterranean, IMAM 2013, A Coruna, Spain, 14-17 Oct. 2013.
  • Akgül, M.A., Kabdaşlı, M.S. (2013), "Dalga enerjisi dönüştürücüler için dairesel silindir üzerinden dalga aşmasının etüdü", IX. Ulusal Temiz Enerji Sempozyumu Bildiriler Kitabı, 25-28 Aralık 2013, Konya, s. 794-803.
  • Akgül, M.A., Kabdaşlı, M.S. (2013), "Dalga enerjisi dönüştürücü - yüzer dalgakıran çok amaçlı sistem tasarımı üzerine", IX. Ulusal Temiz Enerji Sempozyumu Bildiriler Kitabı, 25-28 Aralık 2013, Konya,  s. 784-793.
  • Akgül, M.A. (2013), “Açık deniz limanları”, 1. Ulusal Liman Kongresi, 1-2 Kasım 2013, İzmir, Bildiriler Kitabı, s. 217-232.
  • Akgül, M.A. (2013), “Açık ön yüzlü kısmi kaplamalı keson sistem üzerine”, 1. Ulusal Liman Kongresi, 1-2 Kasım 2013, İzmir, Bildiriler Kitabı, s. 201-216.
  • One Way Shear Design of Large Footings, Almıla Uzel, Evan C. Bentz and Michael P. Collins, fib Symposium “Engineering a Concrete Future: Technology, Modeling and Construction”, 22-24 April 2013, Tel Aviv, ISRAEL. (printed: pp.293-296 ISBN 978-965-92039-0-1)
  • Koseoglu-Imer, D., Kose, B., Altinbas, M., Koyuncu, I. “The Production of Polysulfone (PS) Membrane with Silver Nanoparticles (AgNP): Physical Properties, Filtration Performances, and Biofouling Resistances of Membranes”, J. Membr. Sci, 428, 620-628, (2013) DOI: 10.1016/j.memsci.2012.10.046.
  • Monkul, M.M. (2013). “Influence of gradation on shear strength and volume change behavior of silty sands”, Geomechanics and Engineering, Techno Press, 5(5), 401-417.
  • Koyuncu, I., Kose-Mutlu, B., Ergon, T. Agtas, M. Turken, T. Lee, C.-H. “A Novel Approach in Quorum Quenching MBR Applications”, 3rd International Workshop, MBR for the Next Generation, İstanbul, Türkiye, 17-18 Aralık 2013.
  • Monkul, M.M. (2013). “Importance of geotechnical engineering on development and sustainability of lunar bases”. 6th International Conference on Recent Advances in Space Technologies; RAST 2013, IEEE, 863-867. ISBN: 978-1-4673-6396-9.
  • Okatan, S., Durmaz, G. Guclu, M.C. Ovez, S. Kose, B., Turken, T. Guclu, S. Koyuncu, “Performance of PES Membrane Produced with BisBAL”, 7th IWA Specialized Membrane Technology Conference and Exhibition for Water and Wastewater Treatment and Reuse, Toronto, Kanada, 25-29 Ağustos 2013.
  • Akın, Ö, Monkul, M.M., Eseller-Bayat, E. (2013). “Basit Kesme Deneyi için Homojen ve Suya Doygun Numune Hazırlama Yöntemleri (Homogeneous and Saturated Specimen Preparation Methods for Simple Shear Tests)”. 5th Geotechnical Symposium, Çukurova University, Adana, Türkiye (In Turkish).
  • Durmaz, G., Okatan, S. Güçlü, M. C. Memmedova, I. Köse, B., Türken, T. Güçlü, S. Övez, S. Koyuncu, I. “BisBAL’ın Biyokirlenmeyi Önleyici Madde Olarak Membranlarda Kullanımı ve Performansa Olan Etkileri”, 3. Ulusal Membran Teknolojileri ve Uygulamaları Sempozyumu, Elazığ, Türkiye, 26-27 Eylül 2013.  
  • Ozgun, H., Ersahin, M. E. Erdem, S. Atay, B. Kose, B. Kaya, R. Altinbas, M. Sayili,Hoshan, P. Atay, D. Eren, E. Kinacı, C. Koyuncu, I. “Effects of the Pre-Treatment Alternatives on the Treatment of Oil-Gas Field Produced Water by Nanofiltration and Reverse Osmosis Membranes”, J. Chem. Technol.mBiotechnol., 88(8), 1576-1583, (2013) DOI: 10.1002/jctb.4007.
  • Erkal A., Özhan, H.O. (2013). "Engineering Risk Assessment and Cultural Analyses of Historic Nisanci Hamza Pasa Tomb in Istanbul", 2nd Specialty International Conference on Monumental Cemeteries Knowledge, Conservation and Restyling, Ostuni-Italy, 10-12 May 2013, pp. 1-8
  • Özhan, H.O., Güler, E. (2013). Use of Perforated Base Pedestal to Simulate Gravel Subbase in Evaluating the Internal Erosion of Geosynthetic Clay Liners, Geotechnical Testing Journal, ASTM, 36(3), 418-428. DOI: 10.1520/GTJ20120133

2012

  • Akgül, M.A., Kabdaşlı, M.S. (2012). “Experimental Study about the Wave Attenuation Performance of a Horizontal Interconnected Triple-Pipe Floating Breakwater”, The 22nd International Ocean and Polar Engineering Conference (ISOPE 2012), 17-22 June 2012, Rhodes, Greece.
  • Kabdaşlı, M.S., Akgül, M.A., (2012), “Ekolojik yat limanı tasarımı". Kıyı Alanları Yönetimi Türk Milli Komitesi Türkiye'nin Kıyı ve Deniz Alanları 9. Ulusal Kongresi, 14-17 Kasım 2012, Hatay, Bildiriler Kitabı, Cilt 2.881-888.
  • Oguz, E., Kabdaşlı, M.S., Akgül, M.A., (2012), “Batmamış sazlıkların dalga geçişine etkisinin deneysel araştırılması”. Kıyı Alanları Yönetimi Türk Milli Komitesi Türkiye'nin Kıyı ve Deniz Alanları 9. Ulusal Kongresi, 14-17 Kasım 2012, Hatay, Bildiriler Kitabı, Cilt 2.1029-1036.
  • Kose, B., Ozgun, H. Ersahin, M. E. Dizge, N. Koseoglu-Imer, D. Atay, B. Kaya, R. Altınbas, M. Sayılı, S. Hoshan, P. Atay, D. Eren, E. Kinaci, C., Koyuncu, I. “Performance Evaluation of a Submerged Membrane Bioreactor for the Treatment of Brackish Oil and Natural Gas Field Produced Water”, Desalination, 285, 295-300, (2012) DOI: 10.1016/j.desal.2011.10.016.
  • Monkul, M.M. (2012). “On some of the factors influencing the fines’ role on liquefaction of silty sands”. Geotechnical Special Publication No 225: State of the Art and Practice in Geotechnical Engineering, ASCE, 799-808. ISBN: 978-0-7844-1212-1.
  • Taşkın, K., Yardımcı, N., Karadoğan, H.F, 2012. “Use of Special Bracing Systems in Reinforced Concrete Structures”, International Scientific Conference People Buildings and Environment 2012, 7.-9.11.2012, Lednice, Czech Republic.
  • Vatansever, C., Yardımcı, N., 2012. “Seismic Performance of Code Designed Split-X Braced Frames”, Nordic Steel Construction Conference 2012, Oslo, Norway, 5-7 September 2012.
  • Taşkın, K., Yardımcı, N., Karadoğan, H.F., 2012. “Special Knee Bracing Systems for Retrofitting RC buildings for Earthquakes”, ITUJournal / d.
  • E.B. Yalçın, V. Günay, M. Marşoğlu, “Impact behaviour of composite materials by using low and high speed impact tests”, Advanced Materials Research, Vol. 445, (2012), pp.189-194, Trans Tech Publications. Switzerland.
  • Polat, G., S. Lebedev, P. W. Readman, B. M. O'Reilly, and F. Hauser (2012), Anisotropic Rayleigh-wave tomography of Ireland's crust: Implications for crustal accretion and evolution within the Caledonian Orogen, Geophys. Res. Lett., doi:10.1029/2012GL051014.
  • Özhan, H.O., Güler, E. (2012). “Internal Erosion of Three Different Geosynthetic Clay Liners Tested Over a Perforated Base Pedestal”, 22nd European Young Geotechnical Engineers Conference (EYGEC) (organized by ISSMGE), Goteborg, Sweden, 26-29 August 2012, pp. 9-14

2011

  • Akgül, M.A., Kabdaşlı, M.S., Ayhan,N. (2011), “Yüksek kretli şevli dalgakıranlarda hafif kret blokları kullanımının deneysel incelenmesi”, TMMOB İnşaat Mühendisleri Odası 7. Ulusal Kıyı Mühendisliği Sempozyumu, 21-23 Kasım 2011, Trabzon, Bildiriler Kitabı, s. 257-266.
  • Design of Large Footings for One-way Shear, Almıla Uzel, Bogdan Podgorniak Stanik, Evan C. Bentz, Michael P. Collins, ACI Structural Journal, V. 108, No. 2, March-April 2011. (DOI 10.14359/51664247)
  • Monkul, M.M.Yamamuro, J. A., and Lade, P.V. (2011). “Failure, instability and the second work increment in loose silty sand”, Canadian Geotechnical Journal, NRC Research Press, 48(6), 943-955.
  • Monkul, M.M. and Yamamuro, J. A. (2011). “Influence of silt size and content on liquefaction behavior of sands”, Canadian Geotechnical Journal, NRC Research Press, 48(6), 931-942.
  • Kaya, R., Atay, B. Ozgun, H. Erşahin, M. E. Köse, B., Altınbaş, M. Dizge, N. Sayılı, S. Hoşhan, P. Atay, D. Eren, E. Kınacı, C. Koyuncu, İ. 2 “Petrol ve Doğal Gaz Üretim Faaliyetleri Sonucu Oluşan Atıksuların Yönetimi”, . Ulusal Membran Teknolojileri ve Uygulamaları Sempozyumu,İstanbul, Türkiye, 2-3 Kasım 2011.
  • İmer, D., Köse, B., Altınbas, M. Koyuncu, İ. “Gümüş Nanoparçacıklı (nAg) Polisülfon (PSf) Membran Üretimi Ve Biyokirlenme Özelliklerinin Incelenmesi”, 2. Ulusal Membran Teknolojileri ve Uygulamaları Sempozyumu,2-3 Kasım 2011.
  • Altinbas, M., Atay, B. Erdem, S. Kose, B., Eliduzgun, S. Yilmaz, F. Ozgun, H. Ersahin,E. Sayili, S. Hoshan, P. Atay, D. Eren, E. Kinaci, C. Koyuncu, I. “Bacterial Communities Induced Biofilm Fouling in Aerobic Membrane Bioreactor”, 6th IWA Specialist Conference on Membrane Technology for Water and Wastewater Treatment, Aachen, Almanya, 4-7 Ekim 2011.
  • Vatansever, C., Yardımcı, N., 2011. “Experimental Investigation of Thin Steel Plate Shear Walls with Different Infill-to-Bondary Frame Connections”, Steel and Composite Structures, 11-3, 251-271.
  • Vatansever, C., Yardımcı, N., 2011. “Cyclic Behavior of Thin Steel Plate Shear Walls with Different Web Plate-To-Boundary Frame Connection”, 7th National Earthquake Engineering Conference, İstanbul, May 30th-June 3rd.
  • H.O. Gulsoy, S. Ozbek, V. Gunay, T. Baykara, “Mechanical properties of powder injection molded Ni-based superalloys”, Advanced Materials Research, Volume:278 (2011), pp:289-294, Trans Tech Publications, Switzerland.

2010

  • O. Karagöz, Ö. Ateş and B. Tanırcan (2010) Comparison of Probabilistic Approaches Using Different Attenuation Relationships For an Area in Aegean Region, ESC 2010 32nd General Assembly of the European Seismological Commission Montpellier, France, 6-10 September.
  • Y. C. Toklu, S. C. Toklu and Ö. Ateş (2010) Total Potential Optimization Method Applied to Analysis of Structures, International Symposium on Steel Structures:Culture & Sustainability 2010, 21-23 September 2010, Istanbul, Turkey.
  • Ö. Ateş (2010) Delay analysis techniques use in construction projects, Dynamics 2010, 11. International Project Management Congress, Istanbul Turkey, 02-03 April 2010.
  • Kabdaşlı, M.S., Akgül, M.A. (2010), “İstanbul şehir içi deniz ulaşımının gelişiminin irdelenmesi", Kıyı Alanları Yönetimi Türk Milli Komitesi Türkiye'nin Kıyı ve Deniz Alanları 8. Ulusal Kongresi, 27 Nisan-1 Mayıs 2010, Trabzon, Bildiriler Kitabı, Cilt 2.845-856.
  • Kabdaşlı, M.S., Akgül, M.A., Elginöz, N. (2010), “Türkiye'de kıyı mühendisliğinin tarihi”, Kıyı Alanları Yönetimi Türk Milli Komitesi Türkiye'nin Kıyı ve Deniz Alanları 8. Ulusal Kongresi, 27 Nisan-1 Mayıs 2010, Trabzon, Bildiriler Kitabı, Cilt 3.1151-1160.
  • Monkul, M.M. and Yamamuro, J. A. (2010). “Influence of densification method on some aspects of undrained silty sand behavior”. Fifth International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, San Diego, California (CD-ROM). ISBN: 1-887009-15-9.
  • Monkul, M.M. and Yamamuro, J. A. (2010). “ The effect of nonplastic silt gradation on the liquefaction behavior of sand”. Fifth International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, San Diego, California (CD-ROM). ISBN: 1-887009-15-9.
  • Erdem, S., Altinbas, M. Ozgun, H. Ersahin, M. E. Kayaalp, N. Gencsoy, E. B. Atay, B. Kose, B., Eliduzgun, S. Yilmaz, F. Sayili, S. Hoshan, P. Atay, S. D. Eren, E. Kinaci, C. Koyuncu I., “Treatment of Produced Water Generated from Gas Production Wells by MF and NF/RO Membranes”, IWA Regional Conference and Exhibition on Membrane Technology and Water Reuse (IWA-MTWR-2010), İstanbul, Türkiye, 18-22 Ekim 2010
  • Atay, B., Erdem, S. Kose, B., Ozgun, H. Ersahin, M. E. Kayaalp, N. Altinbas, M. Gencsoy, E. B. Eliduzgun, S. Yilmaz, F. Sayili, S. Hoshan, P. Atay, S. D. Eren, E. Kinaci, C. Koyuncu, I. “Effect of Pre-Ozonation in Membrane Bioreactor (MBR) System During Treatment of Produced Water”, IWA Regional Conference and Exhibition on Membrane Technology and Water Reuse (IWA-MTWR-2010), İstanbul, Türkiye, 18-22 Ekim 2010
  • Monkul, M.M. (2010). “Influence of silt size and content on static liquefaction potential of sand”, Ph.D. Dissertation, Oregon State University, Corvallis, Oregon.
  • Vatansever, C., Yardımcı, N., 2010. “Determining The Slip Coefficient In Slip-Critical Connection By Experimental Methods”, International Symposium “Steel Structures: Culture & Sustainability 2010” 21-23 September 2010, Istanbul, Turkey 399-407.
  • Taşkın, K., Yardımcı, N., Karadoğan, H.F, Yorgun, C., 2010. “Experimental And Analytical Study On Retrofitting RC Frames By Knee Bracing”, International Symposium “Steel Structures: Culture & Sustainability 2010” 21-23 September 2010, Istanbul, Turkey 291-301.
  • Taşkın, K., Yardımcı, N., Karadoğan, H.F, Yorgun, C., Yüksel, E., 2010. “Experimental Work on Retrofitting of 1/3 Scale RC Frames with Simple Steel Braces”, Fourteenth European Conference on Earthquake Engineering, 30 August-03 September 2010, Ohrid, Republic of Macedonia, 880-888.
  • Yardımcı, N., Aydöner, B., Gür’eş, H. Y., Yorgun, C., 2010. Proceedings of the International Symposium “Steel Structures: Culture & Sustainability 2010”, Türk Yapısal Çelik Derneği, ISBN: 978-975-92461-2-9, İstanbul.
  • Vatansever, C., Yardımcı, N., 2010. “Cyclic Behaviour and Numerical Modelling of a Semi-Rigid Frame”, Steel Construction Design and Research, Ernst & Sohn, 3, September 2010, 128-133.
  • M.O. Bora, O. Coban, T. Sınmazcelik, V. Gunay, “Effect of fiber orientation on scratch resistance in unidirectional Carbon-fiber-reinforced polymer matrix composites”, J. of  Reinforced Plastics and Composites, Vol. 29, No:10, (2010), 1476-1490.
  • O. Çoban, M.Ö. Bora, T. Sınmazçelik, V. Günay, “Effect of fiber orientation on viscoelastic properties of polymer matrix composites subjected to thermal cycles”, Polymer Composites, Vol.31(3), (March 2010), pp:411-416.
  • M.Ö. Bora, O. Çoban, T. Sınmazçelik, V. Günay, M. Zeren, “Instrumented indentation and scratch testing evaluation of tribological properties of tin-based bearing materials”, Materials and Design, 31(6), (2010), 2707-2715
  • Güler E., Avcı, C. and Özhan, H.O. (2010). “Advantages of using Geomembrane Laminated Geosynthetic Clay Liners for a Tailing Dam in Emet, Turkey”, 3rd International Symposium on Geosynthetic Clay Liners (organized by IGS), Wurzburg, Germany, 15-16 September 2010, pp. 279-287

2009

  • S.U. Dikmen, Ö. Ateş, R. Akbiyikli and M. Sonmez (2009) A review of utilization of soft computing methods in construction management, Managing Construction for Tomorrow International Conference, Istanbul Turkey October 1-3, 2009
  • Bagci, T., Elginoz, N., Bas, B., Oguz, E., Akgül, M.A., Yuce, A., Kabdaşlı, M.S. (2009) “An experimental study on geotextile usage for protection of scour under submarine pipelines” 13th Congress of Intl. Maritime Assoc. of Mediterranean, IMAM 2009, İstanbul, Turkey, 12-15 Oct. 2009.
  • Köse, B. ve Koyuncu, İ. “Konvansiyonel Aktif Çamur Sistemleri ile MBR Sistemlerinin Tasarımı ve Maliyetlerinin Karşılaştırılması”, 1. Ulusal Membran Teknolojileri ve Uygulamaları Sempozyumu, İstanbul, Türkiye, 2009.
  • Yardımcı, N., 2009. Tevfik Seno Arda High School, “Advancement for Metal Building Congress” 09, 12-13 November, Helsinki (Invited Speaker).
  • Vatansever, C., Yardımcı, N., 2009. “Behaviour of a Semi-Rigid Beam-Column Connection of Thin Steel Plate Shear Walls under Reversed Cyclic Loads”, ITU Journal/d. 8-5, 129-140.
  • Vatansever, C., Yardımcı, N., 2009. “Cyclic Behavior and Experimental Investigation of A Thin Steel Plate Shear Wall”, 3rd National Steel Structures Symposium, Gaziantep, October 8-10, 165-175.
  • E. Ercenk, S. Yılmaz, H.O. Toplan, V. Gunay“Grain growth kinetics in the xAl2O3-6wt% Bi2O3-(94-x)ZnO (x=0, 2, 4) ceramic system”, J. of Ceramic Processing Resarch, Vol.10, No.5, 647-651, (2009).
  • E. Ergül, H. Ö. Gülsoy, V. Günay, “Effect of sintering parameters on mechanical properties of  injection moulded Ti-6Al-4V alloys”, Powder Metallurgy,  vol. 52, No.1, 65-71, (2009)
  • E. Kaçar, M. Mutlu, E. Akman, A. Demir, L. Candan, T. Canel, V. Günay, T. Sınmazçelik, “Characterization of the drilling alumina ceramic using Nd:YAG pulsed laser”, J. of  Materials Processing Technology, 209(4), (2009), 2008-2014.
  • O. Çoban, M.Ö. Bora, T. Sınmazçelik, İ. Cürgül, V. Günay, “Fracture morphology and deformation characteristics of repeatedly impacted thermoplastic matrix composites”, Materials and Design, 30(3), (2009), 628-634. SCI-Exp
  • M.Ö. Bora, O. Çoban, T. Sınmazçelik, I. Cürgül, V. Günay, “On the life time prediction of repeatedly impacted thermoplastic matrix composites”, Materials and Desing, 30(1), (2009), 145-153. SCI-Exp.

2008

  • Almila Uzel and Neb Erakovic (2008). “Post-tensioned Transfer Girder Design for Buildings”, Post Tensioning Institute Technical Conference and Exhibition, May 4-8, St. Louis, MO, USA. http://www.post-tensioning.org/Uploads/Conference/2008%20Convention/S2-3%20- %20PT%20Transfer%20-%20Almila%20Uzel.pdf
  • Vuran E., Bal I.E., Crowley H., Pinho R. (2008), “Determination of equivalent SDOF characteristics of 3D dual RC structures”, the 14th World Conference on Earthquake Engineering,
  • Monkul, M.M. (2008). “Validation of practice oriented models and influence of soil stiffness on lateral pile response due to kinematic loading”, Marine Georesources & Geotechnology, Taylor & Francis, 26(3), 145-159.
  • Monkul, M.M., Ozden, G. (2008). “Erratum to “Compressional behavior of clayey sand and transition fines content” [Engineering Geology, 89(2007), 195–205]”, Engineering Geology, Elsevier, 96(1-2), 105-106.
  • Dickenson S.E., Monkul, M.M. (2008). “Report for McKay’s Market, Coquille, Oregon: Preliminary Seismic Hazard Evaluation; Stability of the Riverfront Slope Including Conceptual Layout for Ground Treatment”, 67 pages.
  • Raeburn, C.L., Monkul, M.M., and Pyles, M. R. (2008). “Evaluation of Corrosion of Metallic Reinforcements and Connections in MSE Retaining Walls”. State Planning and Research Project #643, Final Report, No:FHWA-OR-RD-08-10.
  • O  Çoban, M.Ö. Bora, T. Sınmazçelik, V. Günay, “Termal çevrimlere maruz kalan polimer matrisli kompozitlerde fiber oryantasyonunun viskoelastik özelliklere etkisi”, 14th International Metallurgy and Materials Congress e-Proceedings Book, 16-18 October 2008, İstanbul, pp;1596-1607
  • E. Akagündüz, Z. Yücel, T. Sınmazçelik, V. Günay, “Partikül erozyon ile oluşturulan ısıl işlemli Ti6Al4V alaşımının yüzey özelliklerinin incelenmesi”, 14th International Metallurgy and Materials Congress e-Proceedings Book, 16-18 October 2008, İstanbul, pp;1383-1400
  • E. Ercenk, M. Öztürk, Ş. Yılmaz, V. Günay, “SiC takviyeli Al2O3 seramik kompozitleri”, 14th International  Metallurgy and Materials Congress e-Proceedings Book, 16-18 October 2008, İstanbul, pp;1018-1027
  • S. Kırtay, E. Oktay, V. Günay, “Camların farklı oranlarda SiO2-TiO2 içeren çözeltilerle kaplanmasının mekanik özelliklere ve ıslatma açısına etkisi”, 14th International  Metallurgy and Materials Congress e-Proceedings Book, 16-18 October 2008, İstanbul, pp;960-968,
  • M.Ö. Bora, O. Çoban, T. Sınmazçelik, V. Günay, “Termal çevrimlere maruz kalan polimer kompozitlerde fiber oryantasyonunun eğilme dayanımı ve kırılma morfolojisine etkisi”, 14th International  Metallurgy and Materials Congress e-Proceedings Book, 16-18 October 2008, İstanbul, pp;247-258.
  • Ercenk, H.Ö. Toplan, Ş. Yılmaz, V. Günay, “ZnO-%6 Bi2O3 seramik sisteminin mikroyapısal özelliklerine SrO katkısının etkisi”, 5th International Powder Metallurgy Conference, TPMA (Turkish Powder Metallurgy Association)-TOBB University of Economy and Technology, Bildiriler e-Kitabı, 524-533, Ankara, 8-12 October 2008.
  • L. Turhan, O. Eksik, E.B. Yalcın, A. Demirural, T. Baykara, V. Gunay, “Computational simulations and ballistic verification tests for 7.62 mm AP and 12.7 mm AP bullet impact against ceramic-metal composite armours”, (10th International Conference on Structure Under Shock and Impact, May 2008, Wessex Ins. Technology, Algarve Portugal), Structures Under Shock and Impact X, Vol:98, pages:379-388, 2008.
  • Sınmazcelik, O. Çoban, M.Ö. Bora, V. Gunay, I. Cürgül, “The effects of thermal cycles on the impact fatique properties of thermoplastic matrix composites”, Applied Composite Materials, Vol. 15, Issue.2, March 2008, pp:99-113,   SCI-Exp.
  • T. Sınmazcelik, S. Fidan, V. Gunay, ”Residual Mechanical Properties of Carbon/Polyphenylenesulphide Composites after Solid Particle Erosion “, Materials and Design, 29(7), (2008), 1419-1426. SCI-Exp.
  • Avcı, C., Güler, E. and Özhan, H.O. (2008). “Maden Atık Barajlarında Geotekstil Kil Tabakası Kullanımlarının Değerlendirilmesi”, Üçüncü Ulusal Geosentetikler Konferansı, Boğaziçi Üniversitesi, İstanbul, 13-14 Kasım 2008, pp. 71-80

2007

  • Kırca, V.Ş.Ö., Kabdaşlı, M.S., Seker, D.Z., Çelikoyan, M., Akgül, M.A. "Antifer bloklarla korunan keson dalgakıranların deplasmanlarının deneysel olarak incelenmesi", TMMOB İnşaat Mühendisleri Odası 6. Ulusal Kıyı Mühendisliği Sempozyumu, 25-28 Ekim 2007, İzmir, s. 419-426.
  • Monkul, M.M., Ozden, G. (2007). “Compressional behavior of clayey sand and transition fines content’’, Engineering Geology, Elsevier, 89(3-4),  195-205.  (Ranked as 22nd in the Science Direct’s Top 25 Hottest Articles list in Engineering Geology for Jan-March 2007 period).
  • Vatansever, C., Yardımcı, N., 2007. “Numerical Investigation of Thin Steel Plate Shear Walls”, ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Rethymno, Crete, Greece, 13–16 June 2007.
  • Taşkın, K., Yardımcı, N., Karadoğan, F., 2007. “Retrofitting of Reinforced Concrete Frames by Steel Braced Systems”, 2nd Steel Structures National Symposium, Eskişehir, May 10-11, 2007, 150-162.
  • Vatansever, C., Yardımcı, N., 2007. “Analytical Study of a Thin Steel Plate Shear Wall Under Increasing Horizontal Loads”, 2nd Steel Structures National Symposium, Eskişehir, May 10-11, 2007, 17-28.
  • Vatansever, C., Yardımcı, N., Avşar, Ö., Aydar, U., Şeker, D. Z., 2007. “Determination of Outer Plane Movements of the Plate in a Thin Steel Plate Shear Wall by Photogrammetry”, Turkish National Association of Photogrammetry and Remote Sensing IV Symposium, ITU Ayazağa Campus, June5-7, 2007.
  • Vatansever, C. and Yardımcı, N., 2007. “Analytical Study of a Thin Steel Plate Shear Wall under Increasing Horizontal Loads”, Sixth National Earthquake Engineering Conference, İstanbul, Oct. 16-20, 585-594.
  • A. Güven, T. Sınmazçelik, V. Günay, “Ti-6Al-4V alaşımlarında çentiklerde süperpozisyon etkisinin incelenmesi”, 8. Uluslararası Kırılma Konferansı, Bildiriler Kitabı, syf: 104-114, 7-9 Kasım 2007, İstanbul.
  • T. Sınmazçelik, T. Canel, E. Akman, and V. Gunay, “Drilling of carbon fibre reinforced polymer composites by Nd:YAG laser”, ECCOMAS Thematic Conference on Mechanical Response of Composites, Porto, Portugal, 12–14 September 2007
  • T. Sınmazcelik, O. Çoban, M.O. Bora, V. Gunay, İ.l Curgul , “The effects of thermal cycles on the fatigue impact properties of thermoplastic matrix composites”, ECCOMAS Thematic Conference on Mechanical Response of Composites, Porto, Portugal, 12–14 September 2007
  • O. Coban, M.O. Bora, T. Sınmazcelik, V. Gunay, “Fracture morphology and deformation characteristics of repeatedly impacted thermoplastic matrix composites”, THEPLAC International workshop on thermoplastic matrix composites, Ostuni, İtalya, 28-29 Haziran, 2007.
  • M.O. Bora, O. Coban, T. Sınmazcelik, V. Gunay, “On the life time prediction of repeatedly impacted thermoplastic matrix composites” THEPLAC International workshop on thermoplastic matrix composites, Ostuni, İtalya, Haziran, 2007.
  • T. Ceyhan, V. Günay, A. Çapoğlu, H. Sayrak, Ç. Karaca, “Production and characterization of a glass-ceramic biomaterial and in vitro and in vivo evaluation of its biological effects”, Acta Orthopaedica et Traumatologica Turcica, 41 (4), 307-313, 2007. SCI
  • Ş. Yılmaz, V. Gunay, “Crystallization Kinetics of the SiO2-MgO-3CaO-P2O5-Al2O3-ZrO2 Glass”, J. Materials Science -Poland, Vol.25, No.3, pp.609-617, 2007. SCI-Exp
  • S. Yılmaz, E. Ercenk, H.O. Toplan, V. Gunay, “Grain growth kinetic in xTiO2-6wt.%Bi2O3-(94-x)ZnO (x=0, 2, 4) ceramic system “, J. Materials Sci., 42, pp.5188-5195, 2007   SCI

2006

  • Monkul, M.M., Onal, O. (2006). “A Visual Basic Program for Analysing Oedometer Test Results and Evaluating Intergranular Void Ratio”, Computers and Geosciences, Elsevier, 32, 696-703.
  • Monkul, M.M. (2006). “Stability of loose sandy slopes”. Proceedings of Seventh International Congress on Advances in Civil Engineering, Yildiz Technical University, Istanbul, Türkiye, 13 pages (CD-ROM). ISBN: 975-461-416-4.
  • Taşkın, K., Yüksel, E., Karadoğan, F., Yüce S.Z., Yardımcı, N., 2006. “Retrofitting of Precast Columns, First European Conference on Earthquake Engineering and Seismology”, Geneva, Switzerland, 3-8 September 2006.
  • Yardımcı, N., 2006. “Design of Steel Structures and Design Methods”, Dünya İnşaat,  Kasım 2006, 123-127.
  • G.G. Avcı, V. Gunay, “Emaye Yüzeylerinde İşlevsel Sol-Jel Kaplamalar”, 20th. Uluslararası Emaye Kongresi Bildiriler Kitabı, 235-241, 15-19 Mayıs 2005, İstanbul, Türkiye. (6 dilde basılmıştır).
  • T. Şahin, T. Sınmazçelik, E. Bayramoğlu, V. Günay “PVC malzemenin klimatik yaşlanması: Darbe dayanımının ve morfolojik  değişimlerin incelenmesi”, 13. Uluslararası Metalurji-Malzeme Kongresi Bildiriler e-Kitabı, syf;1086-1094, 9-11 Kasım  2006 İstanbul, Türkiye.
  • T. Şahin, T. Sınmazçelik, E. Bayramoğlu, V. Günay “Klimatik yaşlandırma etkisi ile UHMWPE malzemenin kırılma tokluğu ve morfolojik özelliklerindeki değişimin incelenmesi”, 13. Uluslararası Metalurji-Malzeme Kongresi Bildiriler e-Kitabı, syf;1077-1085, 9-11 Kasım  2006 İstanbul, Türkiye.
  • O. Çoban, T. Sınmazçelik, E. Bayramoğlu, V. Günay, “PEI kompozitlerde atmosferik şartların mekanik, termal ve morfolojik özelliklere etkileri”, 13. Uluslararası Metalurji-Malzeme Kongresi Bildiriler e-Kitabı, syf;1033-1041, 9-11 Kasım  2006 İstanbul, Türkiye.
  • E. Ergül, Ö. Gülsoy, V. Günay, T. Baykara, “Ti6Al4V parçalarının enjeksiyon kalıplama metodu ile üretimi”, 13. Uluslararası Metalurji-Malzeme Kongresi Bildiriler e-Kitabı, syf;861-868, 9-11 Kasım  2006 İstanbul, Türkiye.
  • G.G. Avcı, E. Bayramoğlu, V. Günay, “Sol-Jel yöntemiyle tekstil malzemelere su itici özellik kazandırılması”, 13. Uluslararası Metalurji-Malzeme Kongresi Bildiriler e-Kitabı, syf;487-493, 9-11 Kasım  2006 İstanbul, Türkiye.
  • E. Günay, Y. Öztürk, S. Tuncel, V. Günay, “Balistik amaçlı alumina seramik malzemelerin tahribatsız muayenesi”, 13. Uluslararası Metalurji-Malzeme Kongresi Bildiriler e-Kitabı, syf;374-381, 9-11 Kasım  2006 İstanbul, Türkiye.
  • S. Kırtay, E. Oktay, V. Günay, “Ormosil esaslı SiO2-TiO2 çözeltileriyle kaplanan camların optik özelliklerinin incelenmesi”, 13. Uluslararası Metalurji-Malzeme Kongresi Bildiriler e-Kitabı, syf;313-321, 9-11 Kasım  2006 İstanbul, Türkiye.
  • E. Günay, Y. Öztürk, L.K. Örs, V. Günay, “Al ergitme fırnlarında refrakter-metal etkileşimi ve mikroyapısal değişimin incelenmesi”, 13. Uluslararası Metalurji-Malzeme Kongresi Bildiriler e-Kitabı, syf;293-300, 9-11 Kasım  2006 İstanbul, Türkiye
  • T. Sınmazçelik, M. Güneş, E. Bayramoğlu, V. Günay, “Balistik Zırh uygulamalarında kullanılan seramik tuğlaların yüksek hızlı kamera ile incelenmesi”, 13. Uluslararası Metalurji-Malzeme Kongresi Bildiriler e-Kitabı, syf;265-272, 9-11 Kasım 2006 İstanbul, Türkiye
  • E. Arpaç, P. Tatar, G.G. Avcı, V. Günay, H. Sayılkan,”Sol-Jel yöntemi ile Ag-SiO2 ince filmlerin oluşturulması ve antibakteriyel özelliklerinin incelenmesi”, BOYA/PAINT  (6th International Paint, Varnish Ink and Auxiliary Products Industry Congress and Exhibition) Proceedings Book, pp:260-269, 17-19 May 2006, Istanbul.
  • S. Kırtay, E. Oktay, V. Gunay, “Glass strenthening by SiO2-TiO2 organically modified silica coating”, Thin solid Films, Vol :515, No :4, Dec.5, pp ;2145-2152, 2006. SCI
  • T. Sınmazcelik, A. A.  Arıcı, V. Gunay, Impact-fatique behaviour of unidirectional carbon fibre reinforced polyetherimide (PEI) composites », J. Materials Sci., 41, 6237-6244, 2006   SCI
  • Polat, G., Ozel, N. M., Crampin, S., Ergintav, S., and Tan, O.: Shear wave splitting as a proxy for stress forecast of the case of the 2006 Manyas-Kus Golu (M= 5.3) earthquake, Nat. Hazards Earth Syst. Sci., 12, 1073-1084, doi:10.5194/nhess-12-1073-2012.

2005

  • Monkul, M.M., Ozden, G. (2005). “Effect of intergranular void ratio on one-dimensional compression behavior”. GEOPROB 2005:Proceedings of International Conference on Problematic Soils, International Society of Soil Mechanics and Geotechnical Engineering (ISSMGE), Famagusta, Turkish Republic of Northern Cyprus, 3, pp.1203-1209. ISBN:975-8401-24-6.  
  • Monkul, M.M.  (2005). “Influence of intergranular void ratio on one dimensional compression”, M.Sc. Thesis, Dokuz Eylül University, Izmir, Türkiye.
  • Yardımcı, N., 2005. “Design of Steel Structures and Design Methods”, Türkiye Mühendislik Haberleri, 2005-1, 46-50.
  • Peker, K., Yardımcı, N., 2005. “Retrofitting of Reinforced Concrete Frames with Braced Steel Shear Walls”, Steel Structures Symposium, Ankara, Turkey, Apr. 21-22, 1-12.
  • Vatansever, C., Yardımcı, N., 2005. “Analytical Study of Thin Steel Plate Shear Walled Frames”, Steel Structures Symposium, Ankara, Turkey, Apr., 113-126.
  • Karaman, G., Yardımcı, N., 2005. “Unstiffened Welded Beam-Column Connections Behaviour under Static Loads”, Steel Structures Symposium, Ankara, Turkey, Apr., 143-152.
  • S. Kırtay, E. Oktay, V. Günay, “Organik-İnorganik kaplamaların düzcamın mukavemetine etkisi”, 12. Uluslararası Metalurji-Malzeme Kongresi Bildiriler e-Kitabı, syf;1666-1674, Haziran  2005 İstanbul, Türkiye.
  • E. Ercenk, H. Ö. Toplan, Ş. Yılmaz, V. Günay, “ZnO-Ağ.%6 Bi2O3 seramik sisteminin mikroyapısına TiO2 katkısının etkisi”, 12. Uluslararası Metalurji-Malzeme Kongresi Bildiriler Kitabı, syf;1448-1455, Haziran 2005 İstanbul, Türkiye.
  • D. Kaşlılar, V. Günay, M. Marşoğlu, “Camların sol-jel yöntemiyle yansıtıcı TiO2 kaplanmasının optik özelliklere etkisi”, 12. Uluslararası Metalurji-Malzeme Kongresi Bildiriler Kitabı, syf;1397-1406, Haziran 2005 İstanbul, Türkiye.
  • T. Sınmazçelik, İ. Taşkıran, V. Günay, “SiC seramiklerinde partikül erozyonu-mikroyapı ilişkisi”, 12. Uluslararası Metalurji-Malzeme Kongresi Bildiriler Kitabı, syf;1071-1078, Haziran  2005 İstanbul, Türkiye.

2004

  • Monkul, M.M., Ozden, G. (2004). “İri ve İnce Daneler Arası Boşluk Oranları (Intergranular and interfine void ratio concepts)”. ZM10: Proceedings of Tenth Turkish Congress on Soil Mechanics and Foundation Engineering, TNCSMFE, Istanbul, Türkiye, pp. 3-12 (In Turkish). ISBN:975-561-259-9.
  • Karaman, G., Yardımcı, N., 2004. “Simplified Low Cycle Fatigue Tests of Beam to Column Connections”, 10thNordic Steel Construction Conference, Copenhagen, Denmark, 7-9 June, 129-138.
  • Büyüktaşkın Arda, H.A., Büyüktaşkın, I., Yardımcı, N., 2004. “A Comparison Between the General and Design Principles for Members under Shear and Bending According to TS 4561 and Eurocode3″, 10th Nordic Steel Construction Conference, Copenhagen, Denmark, 7-9 June, 25-33.
  • E.D. Sam, R. Budakoglu, V. Gunay, “Comparison of the properties of various sol-gel derived anti-reflective (AR) coatings on SLS glasses”, Key Engineering Materials, Vols:264-268, (2004), pp:391-394, Trans Tech Publ., Switzerland
  • R. Artır, V. Gunay, B. Bekisoglu, “The effect of fused magnesia addition on the properties of chamotte refractories”, Key Engineering Materials, Vols:264-268, (2004), pp:1807-1810, Trans Tech Publ., Switzerland
  • S. Kırtay, E. Oktay, G.G. Avcı, V. Gunay, “Strengthening of SLS glasses by hybrid ormosil coatings”, Key Engineering Materials, Vols:264-268, (2004), pp:419-422, Trans Tech Publ., Switzerland
  • E.D. Sam, M. Urgen, F.Z. Tepehan, V. Gunay, “Self cleaning photoactive TiO2 coatings on SLS glasses by sol-gel dip coating”, Key Engineering Materials, Vols:264-268, (2004), pp:407-410, Trans Tech Publ., Switzerland
  • B. Ersoy, V. Gunay, “Preparation and characterization of sol-gel derived 4%La2O3- Al2O3 ceramic membrane on clay-based supports”, Key Engineering Materials, Vols:264-268 (2004), pp:403-406, Trans Tech Publ., Switzerland
  • E.D. Sam, S. Kırtay, V. Gunay, “Hydrophobic (water repellent) silica films having high heat resistance by sol-gel dip coating”, Key Engineering Materials, Vols:264-268, (2004), pp:379-382, Trans Tech Publ., Switzerland
  • E.D. Sam, E. Arpat, V. Gunay, “Hybrid nano-composite sol-gel coatings on glass”, Key Engineering Materials, Vols:264-268, (2004), pp:395-398, Trans Tech Publ., Switzerland
  • B. Ersoy, V. Gunay, “Effects of La2O3 addition on the thermal stability of g-Al2O3 gels”, Ceramics International, 30, (2004), 163-170. SCI
  • V. Gunay, O. Gelecek-Sulan, O.T. Ozkan, “Grain Growth Kinetic in xCoO- 6wt%Bi2O3- (94-x)ZnO (x=0, 2, 4) Ceramic System”, Ceramics International, 30 (2004), 105-110. SCI

2002

  • Büyüktaşkın, H.A., Yardımcı, N., 2002. “An Experimental Research on Serviceability and Ultimate Limit States of Simple Trapezoidal Corrugated Steel Sheets”, Advances in Civil Engineering, 5th International Congress, 25-27 September, İstanbul, 481-487.
  • Yardımcı, N., Vatansever, C., 2002. “Plastic Design of Steel Structures”, Dünya İnşaat, 202-03, 87-91.
  • Yardımcı, N., Yorgun, C., 2002. “Semi-Rigid Connections in EC3″, Dünya İnşaat, 202-09, 88-90.
  • S. Kırtay, E.D. Şam, E. Oktay, V. Günay, “Camlarda farklı Mukavemet Ölçüm Yöntemlerinin Kıyaslanması”, 11. Uluslararası Metalurji ve Malzeme Kongresi Bildiriler Kitabı, syf:835-842, Haziran 2002, İstanbul, TMMOB Metalurji Mühendisleri Odası.
  • E.D. Şam, S. Kırtay, E. Oktay, V. Günay, “Sol-Jel Yöntemi ile Camların Silika Kaplanması, Optik ve Mekanik Özelliklerin İncelenmesi”, 11. Uluslararası Metalurji ve Malzeme Kongresi Bildiriler Kitabı, syf:796-803, Haziran 2002, İstanbul, TMMOB Metalurji Mühendisleri Odası.

2001

  • Almila Uzel, Evan C. Bentz, Michael P. Collins (2001). “The Influence of Clamping Stresses on the Shear Response of Concrete Beams”, ACI 2001 Spring Convention, Philadelphia, PA, USA.

2000

  • Seismic Response of Steel Building Frame with Weak Beam-to-Strong Column by Substructure Pseudo Dynamic Testing Method, Toshibumi Fukuta, Hiroto Kato, Fumitoshi Kumazawa and Almila Uzel, 12th World Conference on Earthquake Engineering, February 2000, NEW ZEALAND.
  • Application of Substructure Pseudo Dynamic Testing Method to Steel Building Frame, Toshibumi Fukuta and Almila Uzel, III Japan-Turkey Workshop on Earthquake Engineering, February 21-25, 2000, Istanbul, TURKEY.
  • Yorgun, C., Yardımcı, N., Bayramoğlu,G., Arda, T.S., 2000. “An Experimental Study on End-Plate Moment Connections”, International Conference on Steel Structures of 2000’s, 11-13 September, 89-94.
  • V. Günay, M. Gültekin, O. Yücel, “Sıcaklık ve Su Oranının silika jellerde fiziksel özelliklere etkileri”, 10. Uluslararası Metalurji ve Malzeme Kongresi Bildiriler Kitabı, Cilt:3, syf:1483-1490, Mayıs 2000, İstanbul, TMMOB Metalurji Mühendisleri Odası.

1999

  • Arıoğlu, N. Arıoğlu, E.  and Ö. S. Köylüoğlu, (1999), “The Relationship Between the Tensile and Compressive Strength of Concrete for Strength Range 1-130 MPa and its Practical Applications”, 5th International Symposium on Utilization of High Strength / High Performance Concrete, Sandefjord, Norway
  • Yorgun, C., Yardımcı, N., Odabaşı, Y., 1999. “Rehabilitation of Pre-Fabricated Buildings After 1998 Adana Earthquake”, ASEM’99, The 1st International Conference on Advances in Structural Engineering & Mechanics, Seoul, Korea, August 23-25.
  • Yorgun, C., Yardımcı, N., Bayramoğlu, G., Arda, T.S., 1999. “Investigation on Eccentrically Loaded Bolted Connections”, Proc. of Eurosteel’99, 2nd European Conference on Steel Structures, Praha, May 26-29, 487-490.
  • Yorgun, C., Yardımcı, N., 1999. “Semi-Rigid Connections and Frames in Eurocode 3”, Turkish Civil Engineering XVth Technical Congress and Exhibition Proceedings Book, Nov. 24-25-26, Ankara, 399-414.

1998

  • Arioglu, E., Koyluoglu, OS, (1998), Discussion on “Stress-Strain Relationship of Confined and Unconfined Concrete”(Vol 94, p. 445, 1997),, ACI Materials Journal, Vol. 95, Issue 1, p 83.
  • Free Vibrational Characteristics of Several Buildings Strengthened after the 1995 Dinar Earthquake, Almila Eroz, U. Devrim Ersin, Faruk Karadogan, Kutlu Darilmaz, Ercan Yuksel, Hakan Saruhan, Second Japan-Turkey Workshop on Repair and Strengthening of Existing Structures, 23-25 February, 1998 Istanbul, TURKEY.

1997

  • Dr. Müh. Ö. Sümer Köylüoğlu, Prof. Dr. Ergin Arıoğlu, (1997), “Statistical Relationships Deriven Between 7-28-91 Day Strengths of Concrete Containing Mineral Additives (Fly Ash- Silica Fume- Blast Furnace Slag)” Beton Prefabrikasyon Journal, Vol 41, pp. 5-11, ISSN 1300-3458.
  • Ö. Köylüoğlu (1997). “Civil Engineering Education; How Should It Be?”,Chamber of Civil Engineers,14th Technical Congress, İzmir
  • Ö. Köylüoğlu (1997), “Civil Engineering Education; How Should It Be?”,  Turkish Chamber of Civil Engineers,14thTechnical Congress, İzmir.
  • Arioglu, E., Koyluoglu, OS, (1997), Discussion on “Stress-Strain Relationship of Confined and Unconfined Concrete”,ACI Materials Journal, Vol. 94, Issue 5, pp 445-447.
  • Dr. Müh. Ö. Sümer Köylüoğlu,  Prof. Dr. Ergin Arıoğlu,  (1997) “Determination of the Static Modulus of Elasticity and Strain at Maximum Stress Based on Aggregate Strength“  Beton Prefabrikasyon Journal, Vol 42, pp. 5-11, ISSN 1300-3458.
  • Free Vibrational Characteristics of Several Buildings Damaged During Earthquakes, Faruk KARADOGAN, U. Devrim ERSIN, Kutlu DARILMAZ, Almila EROZ, Ercan YUKSEL, Hakan SARUHAN, Professor Rifat Yarar Symposium, 10 December 1997, Istanbul, TURKEY.
  • Ş. Yılmaz, V. Günay, “Bazalt Camının Refrakter Tuğlalarla Etkileşimi”, 9. Uluslararası Metalurji ve Malzeme Kongresi Bildiriler Kitabı, Cilt:1, Syf:627-632, Haziran 1997, İstanbul, TMMOB, Metalurji Müh. Odası Yayın No:33.
  • V. Günay,”Hot-pressing Behaviours of the Gel and Melt-derived Sodium Borosilicate Glass Powders”, Ceramics International, 23, (1997), 291-296. SCI
  • Ö. Toplan, V. GünayO.T. Özkan, “Grain Growth in the MnO added ZnO-6% Sb2O3 Ceramic System”,  Ceramics International, 23, (1997), 251-255.  SCI

1996

  • Prof. Dr. Ergin Arıoğlu, Dr. Müh. Ö. Sümer Köylüoğlu (1996), “Sample Size Effect in High Strength Concrete”,  Beton Prefabrikasyon Journal, Vol 38, pp. 10-13, ISSN 1300-3458.
  • Arioglu, E., Koyluoglu, OS (1996), Discussion on “Estimation of Coarse Aggregate Strength in High-Strength Concrete”, ACI Materials Journal, Vol. 93, Issue 6, pp 637-639.
  • Arioglu, E., Koyluoglu, OS, (1996), Discussion on “Are Current Concrete Strength Tests Suitable for High-Strength Concrete?”,  Materials and Structures, Vol. 29, Issue 193, pp 578-580.
  • Prof. Dr. Ergin Arıoğlu, Dr. Müh. Ö. Sümer Köylüoğlu (1996), “Investigation of Ductility Property of High and Very High Strength Concrete and Comparsion with Various Specifications”  Beton Prefabrikasyon Journal, Vol 37, pp. 4-10, ISSN 1300-3458.
  • Prof. Dr. Ergin Arıoğlu, Dr. Müh. Ö. Sümer Köylüoğlu (1996), “Stress-Strain Characteristics in High and Very High Strength Concrete”  Beton Prefabrikasyon Journal,  Vol 39, pp. 4-10, ISSN 1300-3458.
  • F. Karadogan, E. Yuksel, E. Orakdogen, A. Ilki, A. Eroz (1996). “Structural Behavior of Prestressed Hollow Core Slab Elements Subjected to Repeated Loading” Technical Report, Structural and Earthquake Engineering Laboratory, Istanbul Technical University, (No.96R-002)
  • Story Addition on Existing Buildings and a Proposal, F. Karadogan, A. Ilki, E. Yuksel, A. Eroz, TUBITAK First Earthquake Symposium, February 1996, Ankara. (Turkish)
  • Yardımcı, N., Yorgun, C., Arda, T.S., 1996. “Tests on Beam-to-Column Strong and Weak Axis Connections”, Journal of the Computers and Structures, 61- 3, 393-399.
  • Arda, T.S., Yardımcı, N.Eyrekçi, O., 1996. “Rehabilitation of Two Floating Bridges-Turkey, Structural Engineering International”, Journal  of  the International  Association for Bridge and Structural Engineering (IABSE), SEI 6-1, February, 17-18.
  • Arda, T.S., Yardımcı, N., Eyrekçi, O.1996. Repair, “Rehabilitation and Replacement of Galata Bridge on Golden-Horn”, Proc. of Third International Conference on Bridge Management, University of Surrey, April 15th-17th, 108-115.
  • Yardımcı, N., Yorgun, C., Arda, T.S., Eyrekçi, O., Bayramoğlu, G., 1996. “Tests on Full-Scale Steel Bolted Beam-to-Column Connections, Structural Assessment The Role of Large Scale and Full Scale Testing”, City University, London, Three Day International Seminar, 1-3 July.
  • Yardımcı, N., Yorgun, C., Arda, T.S., Bayramoğlu, G., Eyrekçi, O., 1996. “Bolted Beam-to-Column Connections, International Colloquium on Semi-Rigid Structural Connections”, IABSE, İstanbul, 25-27 September 43-51.
  • Yorgun, C., Yardımcı, N., Bayramoğlu, G., Arda, T.S., Eyrekçi, O., 1996. “Bolted Beam-to-Column Connections Designed by Double Channels”, Bulletin of the Technical University of Istanbul, 49-3,4, 337-349.
  • S. Sevinçtav-Tarar, V. Günay“Sol-Gel Processing of Alkoxide-derived  Al2O3 Powders”, Interceram, 45(4), 254-260, 1996
  • J. Smid, G.G. Avcı, V. Günay, R. Terpstra, J.P.G.M. Van Eijk, “Preparation and Characterization of  Microporous Ceramic Hollow Fibre Membranes”, J of Membrane Sciences, 112(3), (1996), 85-90. SCI
  • Ş.Yılmaz, O.T. Özkan, V. Günay, “Crystallization Kinetics of Basalt Glass”, Ceramics International, 22(1996), 477-481. SCI
  • G.G. Avcı, Z. Mısırlı, V. Günay, “Processing and Characterization of Micro-filtration Supports Prepared from Alumina Powders”, Ceramics International, 22,(1996), 42-45. SCI
  • V. Günay, S.Hampshire,”Processing and Properties of Pressureless-sintered Si3N4-SiC Composites, J. of Materials Processing Technology, 54(1-4), (1996), 348-354. SCI –Exp

1995

  • Ö. Sümer (1995), “Behavior of Thin-Walled Members with Single Intermediate Stiffeners, Based on Numerical Analyses”, Proceedings of the Third International Conference on Steel and Aluminium Structures, İstanbul, Turkey.
  • Structural Behavior of Prestressed Hollow Core Slab Elements Subjected to Repeated Loading - I, F. Karadogan, E. Yuksel, E. Orakdogen, A. Ilki, A. Eroz, Prof. Turgan Sabis Symposium, November 1995, Istanbul. (Turkish)
  • Arda, T.S., Yardımcı, N., Yorgun, C., Eyrekçi, O., 1995. “Semi-Rigid Behaviour of Welded Beam-to-Column Connections”, ICSAS 95, Proc. of Third International Conference on Steel and Aluminium Structures, Boğaziçi University, 24-26 May, İstanbul, 433-440.
  • Yardımcı, N., Yorgun, C., Arda, T.S., 1995. “Semi-Rigid Welded Beam-to-Column Connections”, Bulletin of the Technical University of Istanbul, 48-3,4, 599-622.
  • Arda, T.S., Yardımcı, N., 1995. “Fire Resistance of Steel Structural Elements”, Akbasım Matbaacılık, İstanbul.
  • Yardımcı, N., Yorgun, C., Arda, T.S., 1995. “An Experimental Study on Semi-Rigid Behaviours of Welded Beam-Column Connections”, IXth National Congress of Mechanics, Ürgüp, Sept. 4-8, 748-757.
  • Yorgun, C., Yardımcı, N., Arda, T.S., 1995. “Load Carrying Capacity of Steel Concrete Composite Floor Plates”, IXth National Congress of Mechanics, Ürgüp, Sept. 4-8, 827-836.
  • Arda, T.S., Yardımcı, N., 1995. “Fire Resistance of Steel Construction Elements”, Akbasım Publishing, İstanbul.
  • J. Smid, G.G. Avcı, V. Günay, R. Terpstra, J.P.G.M. Van Eıjk, “Preparation and Characterization of Microporous Ceramic Hollow Fibre Membranes”, Fourth Euro-Ceramics, Vol.4,  pp:507-514, Ed. A. Bellosi,  Gruppo Editoriale Faenza Editrice S.p.A., October 1995, Italy.
  • H.İ. Bakan, A. Uzunali, V. Günay, “Isıl İşlemin C-PEEK Kompozitlerinin Özelliklerine Etkileri”, 8.Uluslararası Metalurji ve Malzeme Kongresi Bildiriler Kitabı, Cilt-2, syf:1341-1346, Haziran 1995, İstanbul.
  • S. Sevinçtav, E. Günay, V. Günay, “Modifiye Sol-jel Yöntemi ile Al2O3 Üretimi”, 8.Uluslararası Metalurji ve Malzeme Kongresi Bildiriler Kitabı, Cilt-1, syf:575-581, Haziran 1995, İstanbul.
  • E. Günay, T. Baykara, V. Günay, “Farklı Boyutlu Alümina Tozlarının Paketlenme ve Sinterlenme Davranışının İncelenmesi”, 8.Uluslararası Metalurji ve Malzeme Kongresi Bildiriler Kitabı, Cilt-1, syf:555-561, Haziran 1995, İstanbul.
  • Ş. Yılmaz, O.T. Özkan, V. Günay, “Bazalt Camlarının Kristallenme Kinetiği”, 8.Uluslararası Metalurji ve Malzeme Kongresi Bildiriler Kitabı, Cilt-2, syf:1403-1408, Haziran 1995, İstanbul.
  • S. Sevinçtav, V. Günay, “Preparation and Characterization of Submicron Al2O3 Powders from Al-salts via Sol-Gel Precipitation”, Interceram,Vol:.44(4), (1995), 234-237.

1994

  • Yardımcı, N., 1994. “Interaction of Axial Compression Load-Bending Moment in Buckling of Beam-Columns”, ITU Journal, 52- 3,4, 65-74.
  • Yardımcı, N., Yorgun, C., Arda, T.S., 1994. “Calculation of Bolted Semi-Rigid Beam-to-Column Connections by Eurocode 3”, ITU Journal, 52-3,4, 75-83.
  • G.G. Avcı, V. Günay, “İnce Alüminyum Oksit Filmlerinin Hazırlanması ve Membran Amaçlı Kullanımı”, 2.Uluslararası Seramik Kongresi Bildiriler Kitabı, Cilt-2, Mühendislik Seramikleri, syf:148-154, Türk Seramik Derneği Yayınları No:11, Ekim 1994.
  • S. Sevinçtav, E. Arpaç, V. Günay, “Sol-jel Yöntemi ile Alümina Fiber Üretimi”, 2.Uluslararası Seramik Kongresi Bildiriler Kitabı, Cilt-2, Mühendislik Seramikleri, syf:132-138, Türk Seramik Derneği Yayınları No:11, Ekim 1994.
  • Sevinçtav, V. Günay, “Sol-jel Yöntemi ile Alümina Toz Üretimi”, 2. Uluslararası Seramik Kongresi Bildiriler Kitabı, Cilt-2, Mühendislik seramikleri, syf:118-125, Türk Seramik Derneği Yayınları No:11, Ekim 1994.
  • Ş. Yılmaz, O.T. Özkan, V.Günay, “Bazalt Cam ve Cam-seramikleri”, 2. Uluslararası Seramik Kongresi Bildiriler Kitabı, Cilt-1, Geleneksel Seramikler, syf:428-335, Türk Seramik Derneği Yayınları No:10, Ekim 1994.
  • Ş. Ergüt, V. Günay, V.Sevinç, O.T.Özkan, “Bentonit Katkılı Termik Santral Atık Uçucu Küllerinin Sinterleşme Karakterizasyonu”, 2.Uluslararası Seramik Kongresi Bildiriler Kitabı, Cilt-1, Geleneksel Seramikler, syf:319-326, Türk Seramik Derneği Yayınları No:10, Ekim 1994
  • Y.J. Song, V. Günay,  D. O’Sullivan, M.J. Pomeroy, S. Hampshire,  “Pressureless Sintered Si3N4-SiC Composites”, Key Engineering Materials, Vol.89-91,(1994), pp:433-438, Trans Tech. Publ., Switzerland.

1993

  • Ö. Sümer and G. Aşkar (1993), “Dynamic Analysis of a Mono-Symmetric Core-Wall Structure Coupled with Connecting Beams”, International Conference on Acoustics, Acoustical Society of America, Canada.
  • V. Günay, T. Baykara, “Modification of Alumina Ceramics by Sol-Gel Processing”, Third Euro-Ceramics, Vol.1, pp:365-370, Eds. P.Duran, F.F.Fernandez, Faenze Editrice Iberica S.L., 1993, Madrid, Spain.
  • V. Günay, G.G. Avcı, S. Sevinçtav, T. Baykara,  “Sol-Gel Processing of Ceramic Membrane Layers”, Third Euro-Ceramics, Vol.1, pp:651-656, Eds. P.Duran, J.F.Fernandez, Faenze Editrice Iberica S.L., 1993, Madrid, Spain.
  • V. Günay, S. Sevinçtav, E. Günay, T. Baykara,  “Effects of Oxide Additives on the Thermal Stability of Alumina Gels”, Third Euro-Ceramics, Vol.1, pp:267-272, Eds. P.Duran, J.F.Fernandez, Faenze Editrice Iberica S.L., 1993, Madrid, Spain.
  • V. Günay, T. Baykara, “Al2O3-bazlı Zırh Seramikleri”, 7. Uluslararası “Metalurji ve Malzeme” Kongresi Bildiriler Kitabı, Cilt-1, 677-682, Mayıs 1993, Ankara.
  • V. Günay, “Si3N4 Seramiklerinin Sinterlenmesi”, 7. Uluslararası “Metalurji ve Malzeme” Kongresi Bildiriler Kitabı, Cilt-1, 717-722, Mayıs 1993, Ankara.
  • V. Günay, “Seramik-Seramik Kompozitlerinin Üretim Yöntemleri”, 7. Uluslararası “Metalurji ve Malzeme” Kongresi Bildiriler Kitabı, Cilt-2, 1123-1128, Mayıs 1993, Ankara.

1992

  • Ö. Sümer and G. Askar (1992), “Analysis of a Mono-Symmetric Core-Wall Structure Coupled with Connecting Beams”, Thin-Walled Structures, Vol. 14, Issue 3, pp.193-208. (SCI, cited)
  • Kumbasar, N., Pala, S., Aydoğan, M., Altan, M., Yardımcı, N., Yıldırım, H., 1992. “Numerical Analysis and Computer Programming”, T.M.M.O.B. İnşaat Mühendisleri Odası, İstanbul.
  • Kumbasar, N., Pala, S., Aydoğan, M., Altan, M., Yardımcı, N., Yıldırım, H., 1992. “Numerical Analysis Using Computer Softwares”, TMMOB Civil Engineers Chamber, İstanbul.
  • V. Günay, “AlN Seramiklerinin Sinterlenmesi”, Uluslararası Seramik Kongresi Bildiriler Kitabı, Türk Seramik Derneği Yayınları No:5, syf:544-553, Ekim 1992.
  • G.G. Avcı, V. Günay, T. Baykara, “Seramik Membranların Hazırlanması ve Karakterizasyonu”, Uluslararası Seramik Kongresi Bildiriler Kitabı, Türk Seramik Derneği Yayınları No:5, syf:536-543, Ekim 1992.
  • Günay, V. Günay,” a -Sialons”, Proc.Int.Ceramics Congress, Oct.1992, Istanbul, Turkish Ceram.Soc.Publ. No:5, pp:489-498.
  • Hampshire, Y-J. Song, D. O’Sullivan, V. Gunay“Sintering and toughening of silicon nitride-based composites”, Proc. of te 4thInternational Symposium on Ceramic Materials and Components for Engines, Eds: R. Carlsson, T. Johansson, L. Kahlman, pp:707-714, 1992, Goteborg, Sweden

1991

  • Yardımcı, N., 1991. “Buckling Loads and Design Consideration for Thin-Walled Beam-Columns”, Developments in Mechanics, Proc. of Twenty-Second Midwestern Mechanics Conference, 16, University of Missouri-Rolla, Rolla, Missouri, October 6-9, 312-313.
  • Arda, T.S., Yardımcı, N., 1991. “Plastic Analysis of Composite Structural Elements”, Kurtiş Matbaası, İstanbul.
  • Arda, T.S., Yardımcı, N., 1991. “Plastic Calculation of Composite Elements in Steel Construction”, Kurtiş Press, İstanbul.

1990

  • Yardımcı, N., 1990. “Design of Beam-Columns in Terms of Buckling Loads”, ITU Journal, 48-1, 59-68.
  • Yardımcı, N., 1990. “Buckling of Beam-Columns under Uniformly Distributed Load and Axial Force”, ITU Journal, 48-2, 1-10.
  • V. Günay, P.F. James, F.R. Jones, J.E. Bailey, “Continuous Fibre Reinforced Glass and Glass-Ceramic Matrix Composites by Sol-Gel Processing”, Inst.Phys.Conf.Ser.No:111, Int.Conf. on New Materials and Their Applications, Warwick, England, 1990, pp:217-226.

1989

  • Yardımcı, N., Aşkar, G., 1989. “Buckling of I-Cross Sectioned Thin Walled Columns”, ITU Journal, 47- 3, 74-79.
  • Yardımcı, N., 1989. “Local and Lateral Buckling of I-Beams”, Bulletin of the Technical University of Istanbul, 42- 4, 467-497.
  • Yardımcı, N., Aşkar, G., 1989. “Design of I-Cross Sectioned Thin Walled Columns Considering Interaction Buckling”, VIth National Congress of Mechanics, Sept.11-15, Kirazlıyayla, II, 718-728.
  • Arda, T.S., Yardımcı, N., 1989. “Pre-stressed Steel Structures”, 4th Steel Structures Seminar, 2, 27 November-2 December, İstanbul, 35-121.
  • Odabaşı, Y., Aşkar,G., Yardımcı, N., 1989. “Repair and Strengthening of Structures”, 4th Steel Structures Seminar, 2, 27 November-2 December, İstanbul, 123-148.
  • Chen, V. Günay, P.F. James, F.R. Jones, J.E. Bailey, “Sol-Gel Processing of Fibre Reinforced Ceramic Matrix Composites”, Proc.Eurogel’89, Advanced Materials by Sol-Gel Technology, Colmar, France, Dec.1989, pp:31-42.
  • V. Günay, P.F. James, F.R. Jones, J.E. Bailey , “Carbon Fibre Reinforced Glass Matrix Composites by Sol-Gel Processing”, Brit.Cer.Soc.Proc.,45,(1989),229-240.

1988

  • Yardımcı, N., 1988. “Determining the Buckling Loads of Thin Walled I-Beams”, ITU Journal, 46- 4, 46-52.